Jump to content

larryl

Journey Member
  • Posts

    1,428
  • Joined

  • Last visited

  • Days Won

    113

Everything posted by larryl

  1. Correct my 13 uses the first filter type and it was considerably cheaper OEM than the newer version so I replaced mine with the original OEM that lasted 10 yrs 172000 miles before leaking as the seals dry out or crack or whatever happens. There was no leaking anywhere else as I change my oil and made sure not to use gorilla force to tighten the filter housing
  2. 2013 I just disconnected the neg battery terminal on the firewall then the positive.
  3. Installed the new harness and everything is good again
  4. Waste of your time.....the tranny couldn't handle a hemi it would tear it and the rest of the driveline apart also the added weight. A Journey isn't built for this kind of redo look for another type of vehicle
  5. I've changed the Module......didn't help
  6. Let me know what you find out I have changed the TP Module above the left rear wheel it worked for a bit but has quit again. I always get the same -- at the left rear wheel even if I move the wheels My mechanic friend said it could be the TIPM
  7. how many windows do you have down??? Enjoy your old Journey
  8. My 13 Crew has the back up camera and nav with the 8.4 screen factory ordered I think there are modules req'd for both
  9. Are all your carpets dry? Any leaks ? Check the rear floor storage compartments to make sure they are dry
  10. One little white wire can cause a lot of problems.... Both front windows wouldn't work along with the lock unlock buttons and the right side mirror New harness ordered until then I did a splice job so things function Can't complain I guess almost 180000 miles but why make the wires so small?
  11. I would think they are the same maybe a difference if it was AWD.. Any dealer should be able to answer that question for you though
  12. A scan tool might give you codes and a clue or 2
  13. How is the state of your battery? It can cause strange issues
  14. You have to remove the seat and flip it over and start undoing hooks as it's a cover over foam
  15. I think there is an IBS sensor on the cable that can go bad also its down on the battery end of the clamps
  16. Sadly Journeys are at the end of their lifespan and nobody cares much anymore.....but kudos to you for the time and effort you are putting into your project. Hopefully it's not a 4 banger best of luck and enjoy your ride
  17. A Journey over here is not worth the cost or work...Buy a Jeep or Toyota
  18. It's underneath the left rear wheel shield mounted on the front corner 2 10mm bolts hold it on . Pretty easy with the wheel removed I switched wheels around to make sure it wasn't the sensor
  19. So I was able to find a TPM Module on Ebay (used) for $60 as the dealer here told me $380 but none available I installed it today after removing the fuse on the passenger side panel and with the new one installed and the fuse put in the readings all appeared and no more warning lights. Here is a picture of the module
  20. Yup that's where it is...easiest to take the wheel off
×
×
  • Create New...