John/Horace

Welcome to the site. Should be if seams aren’t leaking. Some people dry head lights with a hair dryer and use clear silicone on all the seams, especially the top ones. Thin film only needed.

https://www.theguardian.com/technology/2021/aug/29/the-smartest-person-in-any-room-anywhere-in-defence-of-elon-musk-by-douglas-coupland

There was a check engine light and code for cam sensors, mechanic suggested the work.?

I thought cam shaft sensors changed. Where there codes prompting that work. With 7 people and gear in car it will bog with the 4 cylinder. What are Gas mileage numbers.

I hope the JB weld doesn’t crack and something gets sucked into intake. Thermal plastic welding the parts would be a better idea. There are kits you can buy with a torch and a few types of plastic welding rods, PE, abs, etc.

I'm pretty stiff in the morning sleeping on the ground. Won't be doing this much longer I think. About 180 miles in three days was plenty. Guns stayed home so we tripped over birds all day long. Nice to see them.

Great you got in done, huge amount of work. I’ve wrestled with timing chains and timing belts on overhead cam engines before. Not a lot of room for error. Curious where you got your torque specs, Mitchel on line? Your user name should be engine-guy or car-guy now., for sure.! Rebuilding your engine probably better than a wrecker used engine which may have been neglected. Are you the original owner of this vehicle, if not how many miles did you put on.

Time to mark the coil on cylinder #2 and either put in a new coil, or switch it to another spot and see if code follows. After clearing codes again. How did plugs look, was #2 a mess with carbon ?

Haaa haaa. Out in the bush with the the quad and the tent for few days. Brake hydraulics enough of a challenge, without a spinning truck bed to deal with.

https://www-motor1-com.cdn.ampproject.org/v/s/www.motor1.com/news/537475/2022-dodge-journey-reveal/amp/?amp_js_v=a6&amp_gsa=1&usqp=mq331AQIKAGwASCAAgM%3D#aoh=16330272518402&csi=0&referrer=https%3A%2F%2Fwww.google.com&amp_tf=From %1%24s&ampshare=https%3A%2F%2Fwww.motor1.com%2Fnews%2F537475%2F2022-dodge-journey-reveal%2F

I’m thinking rear taillights wiring harness could be a bear to untangle ?. https://jalopnik.com/no-car-mod-will-ever-be-as-good-as-this-1847746009

If he took the ditch, it’s possible one of the cooling lines was damaged and fluid leaked out. Transmissions need fluid to create motion via torque converter. Start out checking fluid level if you have a dipstick.2.4 or 3.5 should have one.

I don’t think dealer can really be blamed, most likely unfortunate coincidence. Electronics can fail at almost any time. Try unhooking battery or camera fuses and see if camera reboots. There are times when a repair involves leaning all over parts of car, or disturbing adjacent parts doing a repair. Like radiator and a/c condenser when one one of them is changed out. Or partial repairs to exhaust system’s. Stuff gets brittle with age and sometimes it’s unavoidable to have collateral damage. Mechanics will sometimes stay away from some repairs on older high mileage cars for this reason.

Here is a 5% discount code. They are easy to find if this one expires. Paste it in the “how did you find us” box on the payment screen. 184887257150009699

Large time savings too. I have pressed bushings into a few control arms and sub frames before, can get awkward. Even with a 50 ton press at work, I had to get creative to not damage arm while installing bushings. We are in the rust belt with these cars, spraying inside control arms with Rustcheck or Formula 3000 helps a bit. But rusty suspension parts can come apart tying to replace worn bushings as well. Keep an eye on front lower ball joints; Journeys have a tendency to go through them. Use joints with grease fittings if possible, last forever with a few shots of grease once a year.

Not likely key security system acting up if one click occurring. Although key switch has internal contacts which could be worn. Jumping contacts at starter relay under hood bypasses all security stuff and key switch and tests just starter by itself. Two bad starters not very likely IMO. If you have corrosion showing on main power/ground connections under hood, clean them. But low amperage power or ground wires more likely issue.

Pressing in bushings on control arms can be a pain. Do you have access to a large hydraulic press and have you ever used one before. Also need to repaint rusted control arms primer and top coat. Road salt eats up suspension parts. I don’t work for Rockauto, but it is hard to beat their prices on a lot of parts. Moog included.

With a remote battery set up like the Journey there are extra ground and power connections under hood. If I was having starting issues, cleaning up the extra connections under hood would be a good idea. Sometimes ground connections are mounted on painted surfaces. It. never hurts sanding off paint and getting bare metal and putting a thin coat of dielectric grease on both power and ground contacts. Battery connections should never have green corrosion.

Nice to see your detailed pics and a solution to the transmission problem. More intimidating to work on then the rest of the car sometimes. I lifted the signature quote from some southern US guy on another forum. A little blasphemes, but it made me smile too. Sometimes you need a laugh.

Glad you got it sorted out. I fix my adult kids cars often as well; NACAR pit stop repairs not always fun. They don’t live at home. I prefer puttering along without dead lines or pressure. Then it’s kinda fun. O2 sensor fit seems to a problem on lots of cars, very frustrating. I’ve even had dealer supplied O2 not fit. But I have had great results from NTK sensors performance over all. For O2 sensors I have a three piece socket kit that fits a lot of weird applications. Harbour Freight type China kit that real mechanics cringe at. But with a bit if MAP gas in a pinch, always does the job without damaging the insert fitting weld or threads. Rust belt northern cars are always more of a challenge, no matter what kind of mechanic you are. Cheers, you are in the home stretch.

Test The Sensor Circuit Hall Effect sensor: Start by checking the ground side of the circuit. To do this, connect a DMM set to DC volts between the battery positive terminal and sensor ground terminal on the harness side of the connector. If there is a good ground, you should get a reading of about 12 volts. Next, check the 5-volt reference side of the circuit by connecting a DMM set to volts between the battery negative terminal and the sensor reference terminal on the harness side of the connector. Turn the Check the ground side of the circuit. To do this, connect DMM set to DC volts between the battery positive terminal and sensor ground terminal on the harness side of the connector. If there is a good ground, you should get a reading of about 12 volts. If not, the circuit will need to be diagnosed and repaired. Test The Oil Control Solenoid Remove the solenoid connector. Use a digital multimeter set to ohms to check the internal resistance of the solenoid. To do this, connect the meter between the solenoid B+ terminal and the solenoid ground terminal. Compare the resistance measurement to the factory repair specifications. If the meter displays a reading out of specification, or out of limits (OL) indicating an open circuit, the solenoid should be replaced. It's also a good idea to remove the solenoid to visually inspect the screen for metal debris. Check The Oil Control Solenoid Circuit Check the power side of circuit: Remove the solenoid connector. With the vehicle ignition on, use a digital multimeter set to DC volts to check for power at the solenoid (usually 12 volts). To do this, connect the negative meter lead to battery negative terminal and the positive meter lead to the solenoid B+ terminal on harness side of the connector. The meter should read 12 volts. If not, the circuit will need to be diagnosed and repaired. Check the ground side of the circuit: Remove the solenoid connector. With the vehicle ignition on, use a digital multimeter set to DC volts to check for ground. To do this, connect the positive meter lead to battery positive terminal and the negative meter lead to the solenoid ground terminal on harness side of the connector. Command the solenoid on with an OEM equivalent scan tool. The meter should read 12 volts. If not present, the circuit will need to be diagnosed and repaired. Check the timing chain and VVT actuators If everything checks out up to this point, the problem may be with timing chain, corresponding, or VVT actuators. Remove the necessary components to access the timing chain and actuators. Check the chain for excess play, broken guides and/or tensioners. Check the actuators for visible damage, such as worn teeth. Read more at: https://www.obd-codes.com/p000b Copyright OBD-Codes.com

The green rubber grommet on gang elec connector was reused.? Fluid level is well below that during operation it looks like.

People forget the significance of the thermostat temp rating, cut and pasted from thermostat description is an important detail. Its the start to open temp, so not really the exact operating temp. The dash analogue needle sweep gauge is more useful than the instantaneous digital number in the cluster. It Can be misinterpreted some times. MAHLE / CLEVITE TI23795 {Click Info Button for Alternate/OEM Part Numbers} Includes Thermostat; Includes Gasket or Seal Info Start to Open Temperature: 95 C

Good info for the site. One of oil pans removed to do it.? Mopar oem part is $50-ish plus shipping. https://www.rockauto.com/en/catalog/dodge,2014,journey,3.6l+v6,3300354,electrical-switch+&+relay,neutral+safety+switch+/+range+sensor,4584

Nice thought but...warranty’s not the same for the neighbours to the north. Usually it’s 60k kilometres or 5 years bumper to bumper, power train is 100k or five years. Extended warranty would go a bit longer. Ten year coverage I think would be diesel engine type of thing. Much smaller, less competitive market, companies offer less...because they can. Dealerships also like to focus on fine print for claims. So exact oil change records etc are often demanded. Consumer’s have less power generally. Unless you are a lawyer, of course. I think owner should have shopped around and found more competitive quote for repair. Probably with auto recylcer parts.