Jump to content

dhenderhan

Journey Member
  • Posts

    5
  • Joined

  • Last visited

About dhenderhan

Profile Information

  • Region
    U.S. Mountain
  • Journey's Year
    2016

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Update: In an attempt to run power to fan motor, crossed wrong connection at the fuse box and fried a capacitor in some module. Took it to the dealer and they replaced the module, and then found where a bolt had rubbed through the blower supply wire in the bundle that runs under the radiator at the front. Probably would have cost me $50-100 if I would have taken it to them in the first place, but it ended up taking two days for them to troubleshoot what I fried, replace the module, and find the broken wire in couple of hours and ended up costing me $700.
  2. Daytime running lights are enabled, however, upon searching wire harnesses at the front left corner for signs of damage/short I discovered that the problem had disappeared and the lights returned to normal functions. However, now the front blower motor doesn't work. I find it difficult to believe that the two issues aren't related somehow. Rear blower works fine. Checked both fuses (one under hood-40 amp and two under dash-10 amp) and replaced the relay under the dash, no change. No voltage at the connector on the motor itself. Fan switch is a circuit board that isn't diagnose-able (at least by me), but it does register on the screen that you are turning the fan control when it is moved. Suffering without air conditioning is one thing, but not having heat is going to be something else this fall.
  3. Ahhhh....looked it up in other posts. Caught me off guard. (I'm used to seeing SWAG for Scientific WAG....lol)
  4. Not sure what you mean by WAG. Not sure about the daytime running light setting, I'll check when I get home. No aftermarket items. No recent repairs or changes at all, just randomly appeared.
  5. 2016 Journey SXT. I came out of the house this morning to go to work and the left front side clearance light and upper running light (both yellow) were on. I cycled the light switch several times, pushed all of the buttons on the fob, and started and killed the motor. No change. They are the only two lights on and only on the left side. I had to go to work, so I left it in the driveway to investigate later. Any ideas?
×
×
  • Create New...