Jump to content

jdd

Journey Member
  • Posts

    27
  • Joined

  • Last visited

About jdd

Profile Information

  • Region
    Central America
  • Journey's Year
    2014

Recent Profile Visitors

248 profile views
  1. thank you to everyone who has helped me on this. i will keep you posted on what i find.
  2. ok if i can figure out hoy to get the pcm unplugged. i will get it some how and i will let you know what i find
  3. well old engine is gone but i puller all the sensors off of it but i have to find them. i have good ground to cps. i even added a ground or two. i need to get the pcm unplugged and check that pin
  4. i didn't spend much time on it btoday. i tested the three prong cps plug and im getting 5 on both sides and the ground wire is the middle. no salt here in Missouri.unless it snows lol..i bought a new battery sensor and cleared all the codes. i just need to get it running so i can do a relearn on the cam and crank sensorsi added a ground wire from the passenger side all the way to the battery. checked all the grounds and i even cut a piece of aluminum for the grounds on driver side like the pictures showed. still same thing. . so i need to unplug the pcm and check pins 86 ? them plugs are pretty tough to get off there aren't they?
  5. also im not to sure what you want me to do with pin 86 and that chart. if i understood that maybe i could find the problem
  6. i want to thank everyone for their advise and when i get home this evening i will do a scan and see if i can figure out how to put a video of it on here. my scanner can do the relearn and also can program pcm etc.. i will try to put a video of what the scanner is telling me but i cant do a relearn on anything until i get it started. i do thank each and everyone of you guys for helping me. yes both motors were running when i did the swap. there is something i am missing and i think it goes back to the cps. motors didn't sit probably a couple months. starting it did have a slow rank but i fixed that. its still throwing the battery sensor code even after i cleared it. i like dodge products espeally the Cummins . i have 3 of them. maybe i will put a cummings motor in this journey and that will fix it
  7. yes donor car was 2010 avenger. he didn't get the wiring harness so im using the journeys. i tried to do a relearn on the cps and crank sensor and scanner needs motor running to do this procedure. im about to give up. i have done everything you guys said and even the basics . i have a high end scanner. its a ancel ds600. how can i get this piece of junk started?
  8. yes they just parted out the whole car. he didend get the ecm from it. all he got was just the motor. i know it doesn't matter but the two motors look exactly the same. yes the cps i got from auto zone and not OEM. i will do a relearn on it and see what happens. thank you guys very much. i will keep you posted
  9. here are all the codes its throwing now. po113,po335,b2193-00,uo100-00,b1c19,b1c13,b1408-13,b210a-16,b210d-16.
  10. i need to recheck the codes and i will let you all know what they are
  11. im sorry i dont really know much about computers but i have a 2014 journey that my daughter and her husband didn't check oil in and it locked up. he found a 2010 avenger that they lost the keys and was just parting out so i put that motor in the 14 journey. both are 2.4 and it did have the anti theft but i reprogrammed it in. . i cant get the motor tohit a lick.. i changed crank sensor and 1 cam sensor and still nothing. im stumped
×
×
  • Create New...