2late4u

putting in a separate horn button isn't hard did it for my daughters right hand drive conversion on her old jeep, they have a small wiring kit and button just make sure you use a inline fuse on the wiring . check with any parts store or amazon i would expect to have one...

are you saying the journey is running fine now ,,except it is showing the codes? if so just use it as is and see if the codes will go away after some use................. .also i believe the 2.4 uses the copper plugs not the ones you used...keep us informed on what happens.

check you tube on videos, remove and check for loose connections and or buy a replacement

as in my previous post i did reorder the kawell lights and installed as i said above and ran the wires to my back up lights.... i have enough light now, works great and yea you can see the 6 inch led light screwed onto of the red reflector but it doesn't look all that bad, for the price i like them a lot..

so what was your problem prior to wanting to remove the pdc and did this and cleaning what seems to be some corrosion that is shown? just seen your second post, so i guess this fixed your shifting problem,,,, great job and yes you should make a u tube video wouldn't take you very long and it would be make you famous....

change out the heater core as suggested by the dealership . pay them $$$ or check out you tube for a simple way to change it out yourself or have your local mechanic watch it for a cheaper way to do it$.

i just replaced my brakes all 4 corners on my 2014 crossroad and i have about 74 k on it , i had already bought the wagner thermoquite pads and when i removed the pads i was surprised as to how much pad was left, look like about half of the pads were still there . went ahead and changed them all out, the rears looked more worn then the fronts.guess i would have got at least 100 k on them but was half way there so done them all....

oh well havent had any problems so far guess i wait for the letter.....LOL

Fiat Chrysler recalls 4.8 million vehicles, shares fall Fiat Chrysler is warning the owners of about 4.8 million vehicles to stop using the cruise control immediately. A potential defect could leave the driver unable to cancel cruise control during certain circumstances. Drivers should not use cruise control until the vehicles have been inspected. The recall is one of the largest ever issued in the U.S. Phil LeBeau | @Lebeaucarnews Published 24 Mins Ago Updated 2 Mins AgoCNBC.com Source: Fiat Chrysler 2018 Jeep Wrangler Fiat Chrysler is warning the owners of approximately 4.8 million vehicles to stop using the cruise control immediately due a potential defect that could leave the driver unable to cancel cruise control during certain circumstances. The recall is one of the largest ever issued in the U.S. It covers 14 Jeep, Ram, Chrysler and Dodge models built between 2014 and 2018. The automaker says it knows of no accidents, injuries or fatalities caused by the defect. In premarket trading Friday, Fiat Chrysler shares fell about 2.5 percent. The warning to stop using cruise control comes as more than 36 million people get ready to hit the road for the long holiday weekend. Many are likely to be in Fiat Chrysler models covered by the warning and recall. Fiat Chrysler says if drivers are unable to cancel cruise control, they can eventually stop the vehicle by shifting it into neutral and braking. Once the vehicle has stopped, drivers must put it in park in order to cancel the cruise-control engagement. The automaker is planning to fix the defect with a software update. FCA says it will soon start notifying owners when they should bring their vehicles into dealerships for the repair. The following models are affected: 2015-17 Chrysler 200 sedan 2014-18 Chrysler 300 sedan 2017-18 Chrysler Pacifica minivan 2015-18 Dodge Challenger coupe 2014-18 Dodge Charger sedan 2014-18 Dodge Journey CUV 2014-18 Dodge Durango SUV 2014-18 Jeep Cherokee SUV 2014-18 Jeep Grand Cherokee SUV 2018 Jeep Wrangler 2014-19 Ram 1500 pickup 2014-18 Ram 2500 pickup 2014-18 Ram 3500 pickup 2014-18 Ram 3500 cab chassis

nope the one time mine told me to check the gas cap, it reset itself. maybe your cap is still leaking pressure?

i had a 2011 and loved it traded it in with 70 k on it for my 2014 and love it and i now have about 74 k on this one, now can it give you problems yes and no just depends on how it has been treated before you buy it, personally i think you will like it, also we dont have diesels here so not sure what you are looking at either gas or diesel in all city friving the 3.6 doesnt get real great mpg but that is that good luck.

at least he not asking for us to put a down payment for him...

so have you switched to the full sny fuild instead of replacing hoses, also instead of replacing with oem hoes go to your local hyd hose shop and have some good ones made up, shouldn't be to expensive and save the aggravation of replacing them.

yep he should have went with the copper plugs that are oem......he will be posting down the line.

some posters dont listen....LOl

its amazing what you can find out by actually using google..

sounds like the journey went into limp mode to protect the eng or transmission any codes being shown?probally your trans having a sender problem good luck

i doubt it, if it is spinning it is striped,other wise you would be able to taker the cap off

i have used techron fuel additive in the past with my truck that i didnt drive very often ,was told by my mech it would help to help keep the fuel body clean and to prevent stalling worked real good, i put some in my journey every so often when ever its on bogo sale,,,

yes during the winter time there is a loud squeal ,i live in Al. so we dont get cold like they do up north or in Canada ,so mine is usually just a loud squeak or short squeal. havent heard any one complaining about it during warm weather.so why should they have to pay to fix a 7 yr old water pump or power steering problem unless she just bought it and it was in the sales contract that it was to be fixed ? not sure what you meant by your statement....

change your plugs

my 2014 had a bad oil sender at about 45 k all i seen was the Gage was pegged at highest it could go, i was on vacation and as i have the max care warranty , i took it to the out of state dodge dealership they gave me a free rental and it was ready the next day ,cost me my ded of $100. otherwise with the rental the dealer said it would cost about $450 to 500. good luck on what ever you decide to do

cheapest way to go is check your local recycling yard ( junk Yard) for org oem. should be cheaper than new from dealer

yes, i rec the letter on it.

looks more like termites to me, have you noticed any other peoples white cars covered with them? might spray your car once in a while with some bug spray or move i guess...