2late4u

isnt there a fuse box behind the glove box for the inside fuses might try that. check this out http://www.paulstravelpictures.com/Articles/Dodge-Journey-Common-Problems-Repair-Maintenance-Guides.htm

to be honest if you have to ask this question you need to have someone do it for you..... good luck

not sure about our journeys but yrs ago there was a small rubber diaphragm that you could replace on the pump that would fix this problem try asking at auto zone or your parts store for help... went out and looked for the pump and the part i was talking about, well couldn't really even see the pump on my journey so good luck on what you find out report back what ever you do find....

check you wire connections for loose or corroded at the starter and frame some have found that to be their problems... good luck

after putting in a new thermostat and it never got above 148 something is wrong as it should have got up to about 185 -200....

this issue is just one of many reasons i will never buy a autonomous driving car.

well driving down the road and all of sudden i notice the message envelope lit up, thought dam what now, wasn't as bad at all just my key battery getting low so put in a new battery and all is well in the world again, if any one needs it kind of helpful .http://www.paulstravelpictures.com

have to ask why not go to the dealer 2 yrs old 17 k should still be under warranty?

welcome

that is the size i bought also from discount tire. dont forget the extra $60 for using their credit card only took a few minutes answering their question and was approved right away no big deal applying for it...i have about 28k on mine and they still look great not even half way used up...

good luck on the cops not watching that LOL keep it between the ditches......

just thought i throw out there that discount Tire online is offering extra discounts on their tires for the 4th of July sale they do it for all the holidays so if you need tires i bought my last set from them and i was impressed that they were delivered withing 5 days of when i ordered them and i checked the manufacture date on them and they had just been made a month before i bought them. you pay full price but they are offering 2 mail in rebates and if you apply and use their credit card its an extra $60. off the price, i didnt get the tire warranty but that is up to you if you want it.... and on our big size tires (19 inch) they will save you a lot of money

sometimes on difficult repaired or maintenance its best to go by with dealership service center and that way should there be a problem or question its on them, yes i know it will cost you extra $$$ but might be worth it in my mind....i do all my little jobs like oil changes and such but i did pay the dealer to do the transmission fluid change and i did do it early but wanted it on record since i bought the max yrs and miles warranty,, just my 2 cents worth......

yes they will stay on full high beam,you will have to turn off the drl if you go led on brights...

LOL...... that is some expensive led lights.....

just went and checked mine on mu 14 crossroad with curt hitch and mine are tightened tight, and the rear bolt does have more threads showing then what he has and also the 2nd from the rear also. maybe he took the picks before the final tight torque. i hope so anyway, lol. also i did go back about 2 weeks after install and checked my torque on the nuts okay for me.....

take it back to who did the work and see if they see the problem ( pinched wires or something damaged) good luck

yea them rubber hangers are a tad hard to get off at first just lube them up with dish soap and water or spray some wd40 and get to prying them off.....

would assume it should be straight, but why not check with the dodge dealership they should be the experts on it

best place to check would be a dodge dealership lot, but i dont believe that little flap could cause a check engine light as it doesn't fit tight enough to create a seal , think you need to look for a different problem . good luck

welcome to the group

i quit using ramps yrs ago also, bought me a good floor jack and just use the jack stands....

go to the forums page click lighting, check on all different info there.....example led or this The appropriate solution is to fit HIR bulbs - they have the same spread and color, but are 40% brighter than stock for the same wattage. There is a benefit in that the life of an HIR1 and HIR2 bulb is about double that of a conventional halogen bulb. Info on HIR bulbs: http://store.candlepower.com/9011hir.html One key on the base of HIR bulbs has to be trimmed to fit into the 9005/9006 receiver. There are templates for this and it is simple to do. I bought mine from candlepowerinc.com The have a deal for a set of 4 bulbs for $70 . . . . . http://store.candlepower.com/hirsponeseto.html A template for trimming the bulb base can be found on this page: http://store.candlepower.com/mohirbuba.html Edited October 26, 2016 by bramfrank P.S. i have led but if i had to get more i would go with the hir 9012 bulbs

just measured mine on my 2014 crossroad with the curt hitch.... 13 inches. i use mine for a carrier basket for my wife's 3 wheel scooter it does drag a bit on a steep entrance or exit so i just angle off when i see one of them no big problem tho. just go with the curt wiring, a lot less problems then OEM that is what i will do if i ever need the lights....

welcome to the group,look thur the forums for lots of good info