2late4u

hmm.... 2013 for 4800, well cared for and from someone you know? the answer is a screaming yes for the price alone, take it to a garage and have them do a check on it if your not sure about its condition, but if it runs and drives its worth more than 4800....good luck oh by the way at 100k the plugs should be changed if its a 3.6 engine also the transmission service along with the coolant serviced,,,which isn't cheap but needs to be done....plugs around 100-200 transervice around 250 and coolant around 125 depending on who you have do it

dealership could probally give you some ideas on how to replace the seal or how to get to it,but i think you are looking at getting a new unit from the pictures

looks like some of the bearings are missing as well

oh oh that doesn't look good

would check with the dealership for a specification on how much fluid since 2 different engines and possible difference in the unit

welcome to the group

well i would fix the trans mount and exhaust leak first before trying to fix a noise that is hard to replicate,also what kind of noise? rattle or metal clanking or whatever?

when i was 21 (48 yrs ago) yrs old i worked at GMC truck and coach in Pontiac Mi and we built the big semi trucks (16 trucks a day in my area) and i was on lunch break and was behind a paint booth doing some math homework and over heard some guys talking and saying i know i can get the trucks out of the gate and no one will know when or who took them, if we can just get someone up in the office to take care of the paperwork on the titles. needless to say i was quite as a church mouse and they never knew i overheard them,,,,, man i got myself transferred to a different part of the plant as i didnt even want to be near them when this went down...It was a wild ass time and some very ruff plant workers back in thoes days, half of them carried guns inside the plant and drank even in front of the supervisors or with them....

i would assume there is a pressed in seal there where the shaft goes in the case. most garages ( transmission shops or dealership, or even part stores ) or would be able to tell you that for sure, good luck i am sure someone with more advice will chime in soon with better info

nope just missing the cover ,can be bought off amazon,,,,,, we all have this on our journeys

Click to Enlarge (1 Reviews) 5 Stars Humidity Sensor - 2014-2019 Dodge Journey - Mopar W0133-2601954 Review Fitment Notes Part Number: W0133-2601954 Brand: Mopar Condition: New Shipping Options: Ground, Overnight, 2 Day OEM List Price: $77.23 Our Price:$69.70 AMAZON

100k for the 3.6 engine,,also only use the oem iridium plugs as well, any part store or dealership should be able to give you the correct gap

i believe it is a part that determines the humidity inside the journey, dealership or any windshield replacement shop can verify this for you

Mobil 1 M1-113, Fram PH10060, Royal Purple 10-48, K&N HP-1017, ACDelco PF48E, Bosch 3334, Purolator PL12222, WIX 57060XP, Pennzoil HPZ-167, Mopar 4892339AA, Mann-Filter ML 1030 and Hastings LF636.

i have found and only use the mopar filter are almost the same price or in some cases cheaper than aftermarket ones

done that once as the old filter gasket was stuck real good to the oil filter face... LOL had to clean my catch pan and then drain what oil i had just put in and then removed the oil filter to see 2 oil ring gaskets....you only do that boo boo one time

It doesn't take much movement to set the light off Recheck the connections under the seat again also check under the drivers side connections that was the side that made my light come on,,, Better to redo the cheap fix a second time just in case it works,,, there is a youtube video on this as well

or check with your local dodge dealership or just modify your existing shield with some added support and braces would be cheaper,,,might want to check out junk yard/ or you pull it yards for a used one

SHIELD. Accessory Drive. 05116293AC is stamped on your old part Part Number: 68069293AA Supersession(s): 05116293AA; 05116293AC; 05116293AB Fits Journey $ 29.98 Factory Chrysler Parts 1425 W Main St, Bartow, FL 33830

if the wheel bearings are going bad ,that can be a cause for some of the lights and not always a wiggle that you can see , can cause your abs lights and traction control lights by each wheel going a different speed.

the tires wearing on the inside is your rear upper control arms,OEM are non adjustable, i went with aftermarket adj ones and then a 4 wheel alignment,,,,sounds like she does a lot of highway miles, what about the wheel bearings could also be some of the problems, about all i got

56054158AG is the camera pigtail and lens according to mopar not sure what you bought, also if you did the install if the sales code has to be added to make the camera work correctly i would check with your local dodge dealership for more correct info good luck

are you sure this is the right part number as it doesn't bring up the rear camera when i checked it????...it looks like your camera lens is upside down? i would get back in touch with who ever sold this to you, ,,,did you do the install? usually the camera lens comes in a whole new trim bracket that you install on the deck lid...

you need to test the contacts at the driver's door to see if its getting power thur the switch,if it did work one time while messing with it then i would assume that is your problem

i just went out and looked at my 2014 3.6 rear brakes kind of hard to see with the tires on but my bottom caliper bolt has 4 equal side on the flange bolt so that would have been the the one with the rubber sleeve