2late4u

well the other day my airbag light came on and stayed on, i thought well I give it a couple of days and hopefully it will go off, but no such luck so i called the dealership today and they are booked up till next week so they said just bring it in and drop it off next wednesday. i had the recall done on the wiring in the steering column yrs ago so wasn't sure if that was the problem or what, was watching something on youtube and thought hell see what there is out there on this,and seen one saying to check the connectors under the seats and or the wires there,so i went out and checked the passengers side first looking for the connector that was yellow but didnt really see one but did see one connector with the wires with some yellow around them so i did the check on them and then went around to the drivers side and started the journey and nope the light came on and stayed on, so i shut the journey off and looked under the driver's seat and seen some wires wrapped in yellow and the connector so pushed on them and some of the other connectors as well nothing looked loose but then i got back in the journey and started it up and after going thur its startup mode and the airbag light went off, shut it off and restarted it again several times and all seems well now,so seems like it was just a loose connection on my 2014 crossroad with 120 k on it....always check out youtube,hell dealership would have at least charged me the diagnostic charge or more

What can cause a speedometer to stop working? The most common causes of a speedometer that stopped working include are a faulty speed sensor, a broken gear on the speedometer, damaged wiring, or a faulty engine control unit.Jul 11, 2016

LOL I just went out to seer how the belt is positioned on my journey and when i lifted the hood up,,, off to the drivers side a black cat jumped off the top of the side of the engine and scared the hell out of me,,,,,,the weather had just turned off a bit cool this morning got down to around 58 degrees.... almost had to go changed my drawers.....

well as you see he never came back with what was the problem,has been 4 yrs from the last post,,,that said what have you done or not done that is the problem as we cant mind read over the internet,if belts are changed properly there should be no noise or problems also what engine do you have and other info you have

cvt ....oh hell no.......

when you find out your fix to this problem,,,, PLEASE report back on it,as said this has been asked here before but they never come back to report the fix,so no help for the next person For the hell of it I replaced all soft lines and brake booster. BY this do you mean the rubber hoses from the brake lines to the calipers? some have found the rubber hoses being pinched due to rust between the hose and the clamp holding it down

sorry to hear this,and yes them Mi deer can do some damage,,my brother lives in Metamora MI on a longggggg dirt rd and he had a deer crossing just about 1 block from his driveway and the banks on both sides of the rd are real steep and he had a huge buck jump from one side of the bank and landed right on hood of his fairly new truck did a bunch of damage and he had everything fixed and was always real careful when ever he came to that same crossing and dam if it didnt happen again about 3 months after the first one,, he was so mad.... take care

just go to your local dealership parts shop and ask them, also they could see if the part number for 2011 is the same for a newer model. they would know your answer for sure

his problem is not the headlights fault,,,after buying new ones and they are filling up with water,,,,,there HAS to be a different problem other than the headlight there has to be a good amount of water leaking on top or draining over the new headlights that are allowing the water to enter the weep holes . hard to give advise without seeing where he is parking his vech and seeing all the different variables that could affect this problem... BUT 2 different headlight parts filling with water, nope

https://tiresize.com check for yourself BUT yes they will fit just barely .... has been discussed here look in the wheels and tire area

https://www.autorimshop.com try this place if you see the one you need prices are great considering they are new and not used since there so many styles and different sizes hard to give advise over the internet

are you using your cruise control when you notice the bog down as you encounter the bridges as you mention ? and if so when you press on the gas pedal does the journey speed up or still continual to slow down?

so easy to check or replace the plugs on a 2.4..no mention if they have been changed or checked...start with the easiest and cheapest maintenance first .also replace your air filter just to be on the safe side or at least check it..... could be low fuel pressure being sent to the injectors as well

so he turned his cold air feed fed in from the front grill into a hot air feed from the engine heat,, sure makes more noise ,kind of like the old days when we flipped our air filter lid upside down on on the filter housing that sure made more noise sounded good but that is all it did

the motor city mechanic does a great job showing and explaining his videos another mechanic i watch is fix it angel even tho he works on all kinds of cars he does such a great job without talking except for a few oh shit comments and does most of it holding a camera and works with just one hand....

In agreement with OhareFred on this one.....my 2011 didnt have the OEM rear cam from the factory, i i checked with several dealership and they said it couldn't add the oem BUT they could add one that the rear view mirror would show the image instead of my 8.4 in dash screen, but it wasnt an oem, i waited another year and then the oem became available so then i had it installed

in the fuse box either the one under the hood or the other one under the glove box ,,just disconnect the negative cable under the hood and wait around 5-10 minutes then reconnect might help never know till you try

the camera is by the high third brake light and the image is in the rear view mirror ?. Any suggestions ?. so i assume by this comment t is NOT an OEM system that has been installed on your journey? my oem back up camera on my journey would occasionally do the invert but would always revert back to normal after a few seconds and sometimes just wouldn't work when it finally quit they said it was thew camera and lens in the rear hatch that went bad.... good luck on what you find out also who removed the antenna and then reattached it? if it was just a oil change?

by the way,,,, welcome to the group

great you found your problem, i have 2014 and had rear back up camera problems and i checked there but my wires looked great ended up being the actual camera in the hatch,,,just wondering tho did you cut the rubber grommet off around the wires or just switch it down far enough do do your repair

i use ...www.retailmenot.com a lot works great in the U.S. dont know if it works in Canada worth a try they offer discounts on just about any company or store

cars are getting so complicated i wouldn't dare to give a jump start to anyone as wouldn't want to take a chance for any damage,hope someone chimes in soon that might have an idea on what could be the problem ... good luck and report back for others on what you find out good or bad

4 post wonder...LOL

lol back when my 2014 had 70 k on it i ordered front and rear pads (thermoquiet from Wagner) went to change them and hell the fronts only looked half wore out but thought oh well change them out anyways, did all four corners well well thought id check them today, have close to 120 k so about 50 k on this set,,,still looking like over 50 % of pad left and rotors are still looking great as well no shudder or pulsations on the brake pedal as well , so I wont worry about them till around 150-160- k i guess,,,one note tho i havent really liked these Wagner ( seams like a lot of dust off them I think they have cheapened them up from yrs ago, I wouldn't buy them again just go with OEM or Akebona which are supposedly who makes the OEM pads.

just thought i would post this as looks like the easiest replacement i have ever seen on an engine at least it is a better area better than the battery LOL,,,,not sure about draining the coolant onto the belt tho