LUX MAN

Dude. Really. Find a dealer that is worth a ..... This is just a computer update. What moron would suggest you keep a new car on a battery charger, not keep the keys near it and turn off an expensive feature of the car?!? Take it somewhere where they know what they r doing and you will once again enjoy they car

Dude. Really. Find a dealer that is worth a ..... This is just a computer update. What moron would suggest you keep a new car on a battery charger, not keep the keys near it and turn off an expensive feature of the car?!? Take it somewhere where they know what they r doing and you will once again enjoy they car

Ok. All those options by that dealer are crazy. My wife leaves the keys in the car and I don't have a dead battery anymore. See previous posts but it just needs a flash update of the body control module. Have another dealer (one that isn't inept) find out what TSBs technical service bulletins r outstanding for YOUR car (vin specific) and have him flash computer. He will probably also have to flash the Radio amp as well. Mine was due for this and I didn't know it and the radio died last week. Worked but no sound. Not related to your battery problem but you probably need that update too. These computerized cars can be maddening but service te us need to know what to do and Chrysler should notify customers when updates are available and needed.

This just happened to my wife today. After reading this, I unplugged and replugged the Amp and it worked. But I will take it in next week for the Software updates. Thanks for the info and for putting your results on the forum.

Sure. His name is Allen Sayers (sp?) at Classic Dodge In Denton TX. He is the Service Mgr. 940-498-9827 Dealers main number is 950-498-9800

Now that is a nice job! While it is to one side, it looks great. Better than mine IMO! Wish now that I see that, that my guys did that! But as you see from this post, they were inept anyway. I happy at least it is on and it didnt fall off driving down the road! HAHA (so far...) LUX MAN

It is centered actually and both sides are the same size. It is just that the plug bracket is on that side. The bracket is welded to the mopar hitch on that side, so it cannot be removed. It just looks that way since there is nothing on the right. I have seen aftermarket hitchs that are not vertical and they hang down below the whole valance to provide a horizontal hookup. You can even see the crossbars on those vs this one you dont. I personally do not care for it to hang that low. Then again, I do not care for the vertical hitch either, but I am stuck with it. LUX MAN

Yes it is centered on the hitch and the center of the vehicle. With the plug on the left, it does look lopsided. But then again if they just did the hitch and wireharness, it would look offset to the left. Cant win I guess.

The harness doesn't come with a cap but I bought a cover at etrailer.com for $1.59. Here is the link for that http://www.etrailer.com/Accessories-and-Parts/Tow-Ready/20112.html I tried to find around town but couldnt find it. It was easier just to order it from them. Quick and great service too I also bought a vertical hitch adapter from them since you will need one for a vertical hitch http://www.etrailer.com/Hitch-Accessories/Curt/C45013.html I am glad I got rid of that 7 pin harness. Last thing I wanted was for them to start routing around the electrical system under the hood of my new $30k car. The 4 pin just plugs in the back. LUX MAN

Yes. As silly as it sounds it doesn't come with the hitch or harness. It should really come with the hitch IMO LUX MAN

It seems if you get the package you are set, but I dont know about the adapter plate. I bet it does not come with it. Murphys Law ya know. Since mine did not come with the package, I had to buy it separate. It did not come with the hitch either. If you need it the number is listed below. It was like 5 bucks. I think it is on MOPAR.com 68080976AC Wiring Harness 68026722AA Adapter Plate for 4 Pin to Hitch The Star case number that was used to determine what codes to update the car's computer was S1108000077 I would like to hear if you have any trouble. I hope you have smooth sailing. LUX MAN

There are 2 Harnesses. The 4 Pin is the one that will just plug into the harness at the rear of the car. If you get the tow prep package, it comes with the 4 pin harness and the oil cooler. Of course that is on 2011 models, I am assuming it will be the same. But people who got that, the harness was in the back of the car and not installed, since the actual hitch is a dealer installed part. If it is there, all the dealer has to do is plug it in and install the hitch. Then flash the computer with the correct code to turn that feature on. The part numbers and case cosed for mine are listed above. Hopefully yours will be with the car and you wont have to hassle with the stuff we did. The 7 Pin harness that they tried to install in mine has wires running all the way to the fuse box under the hood and they couldnt figure out how to hook it up. The 4 pin is a much easier and cleaner install. Plus that is all most people need since this car cant tow anything large enough to need trailer brakes. LUX MAN PS I still dont like the idea of a vertical hitch, but I bought a huge cargo carrier and plan on using it to the limit of the hitch (350#) and if the pin fails, I can blame Chrysler for a dumb design

I have a 2011 LUX with the 8.4n system. Just found out it plays DVDs right there on the dash. Of course not while moving however. I have seen some people on thus forum hook up headrest monitors on different radios and years. Has anyone done that to one of these systems? Or does anyone know if there are any hidden output jacks? Thanks LUX MAN

I definately feel your pain. My guy said that they flashed the vehicle via satellite while the car was moving. He said they didnt even need to connect to it. After I told my wife this, she said the other day while driving that the screen flickered and has only happened that one time. (Why don't wives mention these things when they happen?...different topic) Let me know if you want the name and number for the service guy here. LUX MAN

Rebus, I dont know what is up with Dodge on this Issue. But I have attached a couple of pics of it on my 2011 LUX. Maybe you could show them to your service guy and prove they are available. He should be able to get this in WA. I got it here in TX. Do you want the name and number of the service guy here? Now that he knows what you need. LUX MAN