Jump to content

Camper

Journey Member
 View Profile  See their activity

  • Posts

    189

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by Camper

  1. Camper

    can you please provide light output from your car, with your headlight? I wold like to see output at night, how far you can see with low beam and high beam.

    Thank you,

  2. Camper
    Looks like is not installed correctly, maybe?
  3. Camper
    No, what I am say, I can push rpm up to 4000, however, the car do not change the gear, it stay on first one, so on that rpm I can push speed up to 60 km/h
  4. Camper
    I do have same problem before, here it is from my one of the post:""""" Returning home from long trip and on last Sunday, got ""check engine light"" on my 2016 Journey (22000 km), connected the scanner and get the following error:"""P084b-Transmission Fluid Pressure Sensor/Switch H Circuit Range/Performance"", Transmission stuck in one gear and do not changed it went to "limp" mode, however it goes to reverse as well.. So I can go 60 km/h on 4000rpm. Dropped car to dealer and get "Valve Body" replaced, everything done under warranty. On my previous Journey-2012 (161000 km) never have this problem.""""". Hope this help
  5. Camper
    Can you please post a photo at night with working LED bar> Thx
  6. Camper
    Agreed,
  7. Camper
    Here is the actual link for Mopar hitch: http://moparonlineparts.com/dodge-journey-hitch-receiver-p-2441.html Also I attached instruction for how to install the hitch. Thx Hitch instalation instruction.pdf
  8. Camper
    Can you please provide exact link for your LED bar? Thx
  9. Camper
    Yes, I am positive,cause installed by my dealer.
  10. Camper
    My dealer installed Mopar trailer hitch on my 2016 Croassroad with out any issue.
  11. Camper
    Take it easy. Good luck.
  12. Camper

    Hello,

    Can you please help me to find the correct answer for the following error:

    Can you please (if possible) find out from engineers, if it possible replace regular head light bulbs with LED light bulbs.
    Also can you, please (if possible again) to find from engineers, what this following errors mean, and how to be fixed:
    1) B162E-11 RIGHT LOW BEAM CONTROL-CIRCUIT SHORT TO GROUND
    2) B162E-15 RIGHT LOW BEAM CONTROL-CIRCUIT SHORT TO BATTERY OR OPEN
    3) B162A-11 LEFT LOW BEAM CONTROL CIRCUIT SHORT TO GROUND

    here is my VIN:3C4PDCGG2GT191893

    Here is more information, just in case:
    ""No matter what I try, I get those errors with LED.I tried 4 different LED light bulbs. Just replaced all headlights bulbs with LED for testing, on my 2016 crossroad, hi beam and DRL working without any issue, as fog lights as well. However, low beam is different story. The lights, is turned on, so , when I switch gear to revers or drive position then right side low beam light turned off, when I put gear in the parking position and shout vehicle off light came back. I tried 4 different LED light bulb. However driverside light working without any issue.
    Also, regular light bulbs working fine, no errors and no shout down, after switching the gear
    """

    Thanks in advance,
    Alex

    1. Show previous comments  1 more
    2. Camper

      Camper

      I tried two different sets,even tried mix them, still same problem.What  LED bulb do you use on your Journey?Can you please provide a link for it, so I can buy them as well?

      Thank you,

      Alex

    3. 2late4u

      2late4u

      to be honest i dont think the led is the best option i kind of wish i had went with the hir bulb that has been discussed on this blog, i mean the led lights are okay but not that much better than i thought they would be. i used off amazon yita motor they do make the signs and road markings a lot brighter but i dont think i see that much farther down the rd.

    4. Journeyman425

      Journeyman425

      As far as I know, the vehicle will set fault codes for LED lights because it's not configured to accept them. LED or HID lights are not optional on a Journey, so the resistance values are likely setting these codes.

       

      Engineering will not assist in solving issues with aftermarket parts - sorry!

       

  13. Camper
    buckshot7526, can you please provide light output from your car, with your headlight? I wold like to see output at night, how far you can see with low beam and high beam. Thank you,
  14. Camper
    My LED do not contain ballast, it direct plug and play. I tried to switching the wires at the plug still same issue.No idea what to do. Will keep original bulbs for now.
  15. Camper
    Returning home from long trip and on last Sunday, got ""check engine light"" on my 2016 Journey (22000 km), connected the scanner and get the following error:"""P084b-Transmission Fluid Pressure Sensor/Switch H Circuit Range/Performance"", Transmission stuck in one gear and do not changed it went to "limp" mode, however it goes to reverse as well.. So I can go 60 km/h on 4000rpm. Dropped car to dealer and get "Valve Body" replaced, everything done under warranty. On my previous Journey-2012 (161000 km) never have this problem.
  16. Camper
    Old ,regular light bulbs, do not causing any error, only LED
  17. Camper
    No matter what I try, I get those errors. Just replaced all headlights bulbs with LED, on my 2016 crossroad, hi beam and DRL working without any issue, as fog lights as well. However, low beam is different story. The lights, is turned on, so , when I switch gear to revers or drive position then right side low beam light turned off, when I put gear in the parking position and shout vehicle off light came back. I tried 4 different LED light bulb. However passenger light working without any issue.
  18. Camper
    Does any one received this error(please see attached) reported by body control module? I get this error, after replaced regular headlight light bulbs high and low beam with LED light bulb. To get that error, I went to my mechanic and used his professional ODB -II scanner.
  19. Camper

    8.4 u Connect parts

    Images added to a gallery album owned by Camper in Dodge Journey Member Albums

  20. Camper
    Error from Body Control Module after replace light bulb with LED

    From the album: 8.4 u Connect parts

  21. Camper
    That is correct, I just swap them for testing. I think the issue with the "driver", I will try to swap the "drivers" from hi beam to the low beam and will see if it working that way.
  22. Camper
    Same light bulb, working on high beam, without any issue (:
  23. Camper
    Even with resistor, left side low beam goes off after 15 min off ride.Just removed both resistors from both sides. Maybe some one can point to solution.
  24. Camper
    Just replaced all headlights bulbs with LED ,on my 2016 crossroad, hi beam and DRL working without any issue, as fog lights as well. However, low beam is different story. The lights, is turned on, then right side light turned off, 10-15 min, later left side turned off. Added resistor to both sides, right side do not light up at all, after that, but left side still working fine. This is what I installed for low beam:Atshark 80W 7200LM 9006 LED Headlight / Headlamp Conversion Kit 3 COB LED 6000K Cool White Super Bright- Replaces Halogen & HID-2 Pack Any idea, what it can cause this? Any one run on this problem?
  25. Camper
    Should work, without any issue. Sales man`s from LKQ, not always provide correct information. I deal with them in the past.
×
×
  • Create New...