Camper

You have to point them down in both options.

Depend, on how much you have to go down with adjustment. If I remember correctly, after retrofitting you do adjust headlight as well. So, both options required adjustment

It could be air in the lines. Also it possible , that the o-ring in master cylinder whent bad and require dto be replaced.

Are you adjusted, using line on the wall? Or went to garage and adjuted, using professional tool?Can you please add pictures, before and after adjustments?

mavericks, where do you attached driver? Did you screw them to the body of the car, or just ;let them to hung on the wires? Can you please provide a pictures, how it done under the hood?

Now I know to and I won't experiment with it. Thank you. I will use regular electrical tape, to protect those connectors

Those small connectors, required to be waterproof, I am tried to get opinions from those who is already installed similar LED bulbs and how they waterproofing, those connectors. in my previous post on page 2, i posted link for liquid electrical tape.I think it will be best use for those type of the connectors. Any idea?

So, your LED lights, do not have that part and just plug and play? Correct? It 40W LED bulb, and yours I think is 30W

Exactly, I got your point, you dint need to say anything else. We all get your point, that the projectors you do install/mount in headlight is better (maybe/questionable).We all here have our choices to install or not to install LED bulbs or HID projectors. However I ask jkeaton, if he do have above parts with his LED light bulbs.

if you check this: https://www.amazon.ca/gp/product/B016KNWUW6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1#productDetails You will see the part, that i called "driver". So, if yours, do not have that part, that is great and it easy install. Then I will order same light as yours. here is the picture for that part:

Does your LED bulb, do not have "driver" ?, just plug directly to the existing connection?

What you guys used to waterproof connector from "driver" to LED light bulb? Just a regular electrical tape? Does some body tried to use this one: 118ml Liquid Electrical Tape STAR BRITE Model #084104PC https://www.homehard...Electrical Tape

Or this one:Digiwave DGA6125 Self Sealing Tape

What you guys used to waterproof connectrot from driver to light bulb? Just a regular electrical tape? Does some body tried to use thid one: 118ml Liquid Electrical Tape STAR BRITE Item #6610-606 Model #084104PChttps://www.homehardware.ca/en/rec/index.htm/Outdoor-Living/Sporting-Goods/Summer-Sports/Boating/Maintenance/118ml-Liquid-Electrical-Tape/_/N-2pqfZ67l/Ne-67n/Ntk-All_EN/R-I6610606?Ntt=Liquid+Electrical+Tape

So, for both LED 9006 and 9005 resistor do not required and they do not flicker?

I have before 2012 CREW, and it came with 4.3" with Sirius satellite, Bluetooth and auto air, so i decide to upgrade to 8.4" with NAV. So called around and find radio, screen , bezel and lower stack for $700.00

I swap my 4.3 to 8.4,( always have auto climate control) however i swap everything: radio it self,screen, scree bezel and lower stack with all buttons.After that it working as charm, no issue.You can get whole set around $700.00 from junk yard.The only things required that radio to operate in your car is proper VIN for radio activation and learning a new security code from your car.Dealer can generate that code, based on donor VIN

no, 8.4" will work with out that module. In order to get everything work properly "auto temp" and so on, you have to replace entire radio"hardware" unit.U will get your 8.4" working with existing radio unit, and it only will provide same functionalities as your 4.3" on the bigger screen.You do not have to change any wires.

Even your proper projectors can blind upcoming traffic. After retrofit with"proper hid projectors" entire head light need to be adjusted using proper tools. The reason for this,when you retrofit headlight, you can`t properly aim projectors. It human nature, it impossible to pinpoint for proper light with out proper tools and adjustment.

Did you change all light bulbs, for high beam and low beam? If you do have installed them for high beam, can you please post a pictures for that as well. What about DRL, it working?

I have 2016 Crossroad, added as option trailer tow package. My dealer entered sales code and activated, without any issue. This was done in February-2016

Did you replaced rear light for plate number as well? If , yes, what the light bulb do you use and from where you get them ?thx

Can you get exact URL for Amazon, so I can order them as well, thx

I do not have to slam my doors on mine 2016 Crossroad

This error represent the following: P0740 Torque Converter Clutch Circuit Malfunction The engine and transmission are actually connected by a fluid coupling mechanism inside of the torque converter which is what multiplies the torque until the speeds equalize and create a "stall" speed where the difference in actual engine RPM and transmission input RPM is around 90% efficient. Torque converter clutch (TCC) solenoids commanded by the Powertrain control module/Engine control module (PCM/ECM) or the Transmission control module (TCM) to direct hydraulic fluid and engage the torque converter clutch to create a solid coupling and increase efficiency. The transmission control module has detected a fault with the circuit that operates the torque converter clutch solenoid. Causes of this DTC may include: Wiring harness to transmission damaged, loose connection, open or shorted circuit Torque converter clutch (TCC) solenoid Transmission control module (TCM)