jojogg

Thank you for your valuable information. I have 2013 Journey and the tire is 225/65R17

I would like to buy 4 RIMS and Winter tires. How to process the TPMS if use these new RIMS and Tires? Thanks a lot.

I successfully installed the parking sensor. I followed the instruction for OEM parking sensor which Lebowski offered. And looks like mostly are correct. I used different holes. The power wire is write and tan, the ground is black. I did not soldering the wire. I just twisted the sensor power wires to parking light wires and typed them firmly. Now everything is ok. Thank you for all your guys help.

is anyone know which pair is for reverse parking light? I found there are 3 group wires. And how to disconnect the connectors? Should I just pull them out or I need some special tools? Thank you.

Will reset the computer system or not if disconnecting the ground power cord from the battery? Thank you.

Thank you. I checked the instruction of the OEM sensor and looks like it is not difficulty to install. However I found that the instruction shows should remove the ground power cord from the battery. Do you know what the reason and if the car will need reset computer system or not? What about to solder the power cable to rear parking power cable without disconnect the battery? Thank you again.

Thank you valuable information. BTW, do you know where can download the instruction for install roof rack for Dodge Journey? Thank you.

Thank you Lebowski, Looks like it is not so easy to install the parking sensor. I will try it to connect the sensor to the 12 vdc outlet. The pro is the sensor can detect if there is a car beside or not when try to change the lane. Thank you again.

I need to install a parking sensor, however I do not know how to connect the the power cord to the socket inside the trunk rear driver side. I checked the trunk and looks like I need remove the left side plastic cover. Thank you in advance.