Jump to content

jkeaton

Moderator
  • Posts

    5,779
  • Joined

  • Last visited

  • Days Won

    455

Everything posted by jkeaton

  1. Yes. If they are not the right size it will cause issues. Yep. If they are not the same size, it will cause problems somewhere.
  2. jkeaton

    Done light

    This. Check on eBay. Tons of sunglasses holder overhead cubby dome light combos on there from various vehicles. Would be a custom install but could be done. http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.Xsunglass+holder+dome+light+cubby.TRS0&_nkw=sunglass+holder+dome+light+cubby&_sacat=0
  3. Try resetting the mileage and see if that works. It's just a glorified vacuum gauge. At any rate, I never look at mine except once in a blue moon to see what I'm averaging and compare it to calculated mileage. I have never been able to "modify my driving habits" to gain any significant mileage numbers. I drive like I drive and the mileage is what it is.
  4. Unfortunately, yes. Transmission clunks and thunks are well documented on this site.
  5. Which part of the HVAC are you referring to? Vents? Control panel?
  6. jkeaton

    Back!

    Glad you made it home safe. Thanks for the blast of arctic air, single digits here this weekend.
  7. Both the 2.4 and 3.5/3.6 are used in numerous platforms. Engine repair should be the same if you can find one for another model. Curious as to the need for rocker arm repair?
  8. Welcome to the forum. What does your window sticker say? What trim level do you have? Do you have the phone buttons on the left side of the steering wheel? Without detailed info we have to ask a lot of questions.
  9. Glad it worked out. Thanks for reporting back. Vehicles these days are so sensitive. I always try the ol "reboot" before anything else. lol
  10. Bout a half inch bigger all around. Should be fine.
  11. You might have to resort to the old wrap a string around the sway bar and the measure. Or use a set of calipers to measure the diameter.
  12. Not necessarily, especially if they never greased them from the factory.
  13. Had the same issue with my front end clunk. Had to take it in twice and actually show them the TSB before they replaced the parts. First they just greased the sway bar bushings and said it was good. lol
  14. We had our 09 for 4 years and 80,000+ miles, never had any sort of bearing issue. That being said, it is not unheard of for rotating parts to fail. both bearings being rusted sounds like a lack of lubrication (grease) issue. I assume you actually saw the parts while still on the vehicle?
  15. Welcome to the forum. Check the accessories and modifications sections for ideas on customizing your DJ. Not much aftermarket out there but we have quite a few creative members who have done some amazing things with their rides.
×
×
  • Create New...