dhh3

Sounds like a slow draw on the battery. Do you have an underhood light? These are usually mercury controlled and if they are not mounted correctly, they will stay on, even when the hood is closed.

I had a set in the shape of a hockey stick. I bought them for my Nitro, but never installed them. Now, I'm thing about doing this to my DJ, but there was no place to install to ones for the Nitro. So, now I'm looking for a little input to see what other members have done. I'll look again for the lip around the headlights. How hard is it to take them out?

My 2014 just turned over 2,800! LOL Boy, do I have a way to go.

Without taking my headlights apart (I'm too chicken s**t to do this in the oven), where would be a good place to mount a set of LEDS for DRLs, since mine does have the factory code to turn them on? Has anyone done this? There is a pre-2016 Durango, with LED strips mounted near the fog lights, He is always going too fast to stop him, and I have never seen him parked to have a close look. Thanks for any input.

Good information.

Next time I need some work done I'm calling him!

OIC - we have 3 here. I wasn't thinking indoors. I stand corrected. Fort Wayne Komets

My little screen between the tach and speedometer says "key has left the vehicle" if I get out of the car with the fob in my pocket. For the lock/unlock to work, you have to be within 5' of the car with the fob, according to the manual. I have no idea how far I can walk away and it will stay running. I was just thinking there was an electrical hiccup between the fob and the key - or the push to start button went from RUN to OFF by itself.

I cucur! LOL

Welcome to the forum.

What is a "Rust Prevention Module"?

Ice in the Summer?

Extremely happy. I would recommend these to anyone. Only the seat back on the passenger side can be done, because of some sensor on the seat bottom. So, I opted out of doing the passenger seat. There is a member here that did his passenger side seat back also, for his wife. My wife passed two years ago of breast cancer. 90% of the time I'm in the car by myself.

I'm slacking! There is really nothing to show, other than a tiny, 3-position round toggle switch located in front of the seat controls. Push the switch in at the top for High, push in the bottom for Low, or in the middle is off. There is no timer, so the heater stays on until I turn it off. When the switch is in the High position, two tiny orange bars are lit; when in the Low position, one tiny orange bar is lit. The grid wires are located within a nice felt pad, with double stick tape on the bottom. The tech pulls off the backing paper and sticks the grids to the foam on the seat bottom and seat back. The grids were made specifically for the DJ seats, so there was no cutting. High gets really hot. Low is just right, once it is too hot to handle! If I leave the switch in either the High or Low position, the heater will come on as soon as I start the car. The felt was thick enough that I had to slightly readjust the position of my seat. This is great on my broken back!

Curious to see how you make out.

Welcome to the forum. I was born and raised on LI!

It could be a warped rotor, but you would fell a pulsing in the steering wheel, when applying your brakes. I would check your 1/2 shafts and CV joints.

In the US, the 2 front windows can not be tinted. I like the slight tint to your front windows.

The EU version must use different tires from the Factory. I read both good and bad thing about the Factory Khumos here on the forum. The bad seemed to outweigh the good. So, I purchased a set of Bridgestone Dueler H/L Alenza Plus. These tires made a huge improvement over stock.

Possibly the heater core is leaking.

Thank you. Is a CD copied to a computer considered an mp3 file?

On ebay, search dodge journey mopar You will need to bring it to your Dealer to have it programmed. Myself, I would not trust any of these except Mopar. Go for price + free shipping. My Dealer will match any ebay price.

I was afraid of that. Thank you for letting me know. 1. Can you give me instructions how to do this? 2. Can I do this with the music in my iTunes Library? Or, do I drag one album out, install the file, and then put it back in the iTunes Library. Can I drag it to the desktop and insert the file if I can not do it in the Library? (sounds kinky, huh!) 3. Once Uconnect comes out with the iOS8 update, I will do this only to the songs which do not display the artwork. 4. Is the album considered the mp3 file, or each song? I have never done anything like this before! Thank you very much for any help you can offer.

Can one of you post a picture of your HIDs? Thank you.

Did it come from Mopar? If so, there would be instructions; either printed with icons or on a CD.