HugoClement Posted October 30, 2017 Report Share Posted October 30, 2017 Hi, I want to install LED for my low beam but I ran into the same problem with every set I bought. I tried three different 9006 bulb and they all work fine when I open them without the motor running, when I start the motor they stay on for a second and the they turn off. I tried with a Canbus cancellor and with a load resistor and every combination possible of those but always the same problem. Anyone has any ideas of what I could do? Quote Link to comment Share on other sites More sharing options...
jkeaton Posted October 31, 2017 Report Share Posted October 31, 2017 My LED’s work fine. Not sure what could be the problem. Quote Link to comment Share on other sites More sharing options...
Bryman31 Posted October 31, 2017 Report Share Posted October 31, 2017 15 hours ago, jkeaton said: My LED’s work fine. Not sure what could be the problem. just out of curiosity..... do yu have the oem headlight housings? if so do you have a pic of the led's turned on? id like to see what they look like from inside the car..... Quote Link to comment Share on other sites More sharing options...
2late4u Posted October 31, 2017 Report Share Posted October 31, 2017 17 hours ago, HugoClement said: Hi, I want to install LED for my low beam but I ran into the same problem with every set I bought. I tried three different 9006 bulb and they all work fine when I open them without the motor running, when I start the motor they stay on for a second and the they turn off. I tried with a Canbus cancellor and with a load resistor and every combination possible of those but always the same problem. Anyone has any ideas of what I could do? was this 3 different sets of led (different brands ) or all from the same brand.......as i had no problem with my led lights. Quote Link to comment Share on other sites More sharing options...
jkeaton Posted October 31, 2017 Report Share Posted October 31, 2017 (edited) 57 minutes ago, Bryman31 said: just out of curiosity..... do yu have the oem headlight housings? if so do you have a pic of the led's turned on? id like to see what they look like from inside the car..... I don't have a pic from inside the car. yes, stock housings. Edited October 31, 2017 by jkeaton Bryman31 1 Quote Link to comment Share on other sites More sharing options...
HugoClement Posted October 31, 2017 Author Report Share Posted October 31, 2017 3 hours ago, 2late4u said: was this 3 different sets of led (different brands ) or all from the same brand.......as i had no problem with my led lights. It was 3 different sets from 3 different brand. At first I thought the set I bought was too cheap but the 9005 of this brand dim for the DRL and go full brightness for high beam. And I tried with different LED chip (Cree/Cob) Quote Link to comment Share on other sites More sharing options...
HugoClement Posted November 8, 2017 Author Report Share Posted November 8, 2017 For those who might come across the same problem has me, a decoder that specified working with TIPM module solved my problem. Quote Link to comment Share on other sites More sharing options...
DJHanks Posted December 28, 2017 Report Share Posted December 28, 2017 Do you have the info on that? What brand lights did you run and do you have pics? Quote Link to comment Share on other sites More sharing options...
tjboston5676 Posted January 3, 2018 Report Share Posted January 3, 2018 please stop putting leds in halogen reflector housings. they may seem brighter but will lack depth and blind other drivers. put an upgraded halogen bulb or retrofit an hid projector into it please. jkeaton 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.