Rausch7928 Posted February 3, 2018 Report Share Posted February 3, 2018 Hello, I cracked our front bumper on our 15' Dodge Journey and I'm wondering how difficult it would be to replace it myself? I'm mechanically inclined, so I'm not concerned about the work, but curious if anyone else replaced one before and if there are any tricks? From what I gathered, the front bumper on the 15' is two parts...I'm still researching this to confirm. I was told this by a local body shop...so, I'm assuming they are accurate. :-) TIA, Joe Quote Link to comment Share on other sites More sharing options...
jkeaton Posted February 3, 2018 Report Share Posted February 3, 2018 Bunch of push pins and screws. Fairly easy. Probably have to remove the wheels. 2late4u 1 Quote Link to comment Share on other sites More sharing options...
2late4u Posted February 3, 2018 Report Share Posted February 3, 2018 once when i was working in St Louis at the van plant had to learn to use the robot arm to lift and install the rear bumper covers on the vans like jkeaton said ,just a few screws and push pins. good luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.