No AC passanger side

[Doug Dutcher]

I already changed 2 of 3 three blend door actuators air blows cold on driver but passanger side stays hot no matter what to include defrost setting and floor heat

[SylvainB]

When you change a blend door actuator, I think you need to have it recalibrated by the dealer. You need a scan to do this.

[mechanical-idiot]

We have the exact same problem (it started yesterday).  It is working today, so I guess I better get the blend door actuator replaced.  How many are under the front dash, and which one specifically needs to be replaced?  I looked on ebay for them, but there are two or three different ones there.  I am not sure which one to purchase, or if I should just let the dealer take care of it all?  Are they idiot proof to install - that is, could a mechanical idiot like myself install it with no problems?

 

Would it be smart to purchase an after market one, or go with the Mopar one at the dealer? 

 

All advice is welcome, but remember, I really know nothing about mechanical issues, other than what I have read here on the forum.  Thank God for this forum, it is very helpful.

 

Thanks

 

Mechanical-idiot

[2late4u]

my 2011 had a few times it  hung up with the air coming out the floor but always reset it self after a short while, havent had any problems with 2014 model   knock on wood