2011DodgeRamJourney Posted January 23, 2019 Report Share Posted January 23, 2019 I got a CEL light in -26 degrees weather Went away when temp went to -10 C. engine has been running "throatier" at idle (does not show when you step on gas) for sometime. I wonder will some sort of sensor do this? I dont want to go get code read and spend $$$... Quote Link to comment Share on other sites More sharing options...
jkeaton Posted January 23, 2019 Report Share Posted January 23, 2019 You can buy code readers for less than $20 these days. Or, drop by an auto parts store and they can read it for you. Yes, it's a sensor causing it and you need to know the code to know what sensor it is. Quote Link to comment Share on other sites More sharing options...
OhareFred Posted January 23, 2019 Report Share Posted January 23, 2019 It doesn’t cost to have the code read at most auto parts stores, if that’s what you meant. If if you meant you didn’t want the code read because you don’t want to spend money to fix it, then ignore it, have the car crap out, then complain about how Dodge sucks. Cars cost money to keep running, fact of owning one. larryl and jkeaton 1 1 Quote Link to comment Share on other sites More sharing options...
Hankster Posted January 23, 2019 Report Share Posted January 23, 2019 Is it possible to get the codes with out a reader. My 2014 ram van still allows the key dance method. Hank jkeaton 1 Quote Link to comment Share on other sites More sharing options...
OhareFred Posted January 23, 2019 Report Share Posted January 23, 2019 (edited) For the DJ..gotta have a code reader Edited January 23, 2019 by OhareFred jkeaton 1 Quote Link to comment Share on other sites More sharing options...
bfurth Posted January 23, 2019 Report Share Posted January 23, 2019 46 minutes ago, OhareFred said: For the DJ..gotta have a code reader Which is utterly stupid, considering we have a computer display right in front of us. I second the "go to any auto DIY shop, or buy a code reader on Amazon" sentiment. jkeaton 1 Quote Link to comment Share on other sites More sharing options...
2011DodgeRamJourney Posted January 25, 2019 Author Report Share Posted January 25, 2019 On 1/23/2019 at 3:39 PM, OhareFred said: It doesn’t cost to have the code read at most auto parts stores, if that’s what you meant. If if you meant you didn’t want the code read because you don’t want to spend money to fix it, then ignore it, have the car crap out, then complain about how Dodge sucks. Cars cost money to keep running, fact of owning one. I want to get it fixed and will, I just wondered if I could get the code read for free lolz. The light is now off which is odd to me, cause the exhaust noise is still there. A little throatier at idle and does not increase with throttle. the whole thing is just odd Quote Link to comment Share on other sites More sharing options...
jkeaton Posted January 25, 2019 Report Share Posted January 25, 2019 (edited) The code is still stored even if the light goes out by itself. As stated, take it to an auto parts store and get the code. Then you will know what needs to be fixed. Edited January 25, 2019 by jkeaton Quote Link to comment Share on other sites More sharing options...
2011DodgeRamJourney Posted January 25, 2019 Author Report Share Posted January 25, 2019 I have an appoitnment monday. I shall report back. jkeaton 1 Quote Link to comment Share on other sites More sharing options...
2011DodgeRamJourney Posted January 29, 2019 Author Report Share Posted January 29, 2019 turns out it was an "exhaust related code'. that exhaust pipe just behind the bumper had its bolts rusted right off and was allowing some fumes to escape, triggering the code. A couple new bolts and boom. quiet truck again. Anyone else had this happen? Quote Link to comment Share on other sites More sharing options...
jkeaton Posted January 29, 2019 Report Share Posted January 29, 2019 Never heard of an "exhaust code" related to an exhaust leak at the rear of the vehicle. What was the exact code? Also, bolts do rust over time. Quote Link to comment Share on other sites More sharing options...
2011DodgeRamJourney Posted January 29, 2019 Author Report Share Posted January 29, 2019 It was not at the rear. at the front. he found the issue, didnt tell me what the code was but he know before looking at the code Quote Link to comment Share on other sites More sharing options...
larryl Posted January 29, 2019 Report Share Posted January 29, 2019 Maybe an o2 sensor? Quote Link to comment Share on other sites More sharing options...
jkeaton Posted January 29, 2019 Report Share Posted January 29, 2019 Probably an O2 sensor code. Make a note to yourself, always get the actual code. 2011DodgeRamJourney, Summer Solstice and OhareFred 1 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.