Jump to content

Recommended Posts

My battery died, so I put in a new one. The new one was draining as well over 2-3 days. Electrical Shop tested and found the drain was from Fuse 131 ( hands free), they pulled the fuse and it fixed the drain on the battery.

The hands free had stopped working before the old battery died, but I had not made the connection to the battery issue.

So what needs to be replace? the module, wiring? Because the bluetooth was always searching for the hands free and never connecting, would that cause a power drain even when the Journey ignition was off?

 

Link to comment
Share on other sites

A good scanner with CAN/BUS capability that can go into BCM controlled systems should point you to the fault now that you know the system causing the drain.

  From my recent experience with our 2011(same stuff), I found actual wires to be well secure and that most probably you will find it in the "hands free" module.

  Some have posted of similar happenings and said that due to cost and lack of need for the feature , that they had the module connection disconnected.

   I'm pretty new to these "new fangled" electronics, so I can't offer much more help.   Good Luck, and post back how things "work out".

Link to comment
Share on other sites

55 minutes ago, John/Horace said:

You could get dealer to replace module but you would need to use the  product shown in the picture below first.

Probably in the $800 ish zone.

 

 

14389ACC-C18F-4353-916D-B64C2D86A408.webp

your link brings up Passion based Lubricant ....LOL

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...