qwizzy Posted June 4, 2022 Report Share Posted June 4, 2022 Ok, so about a month ago i posted about the issue of my trucks trasfer case & today since its been parked for about a month now. Ive decided to dig deeper into removing the output shaft inside the trasfer case. I dont know if this is a easy fix or hard but, can someone tell me if this part can be replaced? The bearings are shot so i either want to buy this part completely new or used or if you know if i can just replace the bearings Quote Link to comment Share on other sites More sharing options...
2late4u Posted June 5, 2022 Report Share Posted June 5, 2022 check the part yards like lkq if you can't buy an oem part have you checked with the dealership parts center? Quote Link to comment Share on other sites More sharing options...
qwizzy Posted June 5, 2022 Author Report Share Posted June 5, 2022 ill try lkq, but no not yet i was going to Monday morning Quote Link to comment Share on other sites More sharing options...
John/Horace Posted June 5, 2022 Report Share Posted June 5, 2022 There are several bearings on the other output shafts that may have major wear from the bad oil. Just rebuilding the shaft in the pic might only buy you a few months. A transmission shop might be able to rebuild the bad unit. But normally the cost would be a lot higher than a good used unit. Hopefully there will be other opinions. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.