Gord Posted June 26, 2022 Report Share Posted June 26, 2022 We have a 2010 dodge journey. When walking towards it it will lock and unlock .We are not holding the remote. Any one have this issue . Quote Link to comment Share on other sites More sharing options...
2late4u Posted June 26, 2022 Report Share Posted June 26, 2022 do you have 2 remotes? might try replacing the batteries? or remove the batteries and then reinstall them kind of like rebooting your computer but sounds like maybe the button on the remote is staying engaged, have never heard of this problem...good luck and please report back on your solution in case others has this happen to them Quote Link to comment Share on other sites More sharing options...
Gord Posted June 26, 2022 Author Report Share Posted June 26, 2022 Ok thanks .Will let you know. Quote Link to comment Share on other sites More sharing options...
Gord Posted June 28, 2022 Author Report Share Posted June 28, 2022 Anyone seen this before .Thanks. Quote Link to comment Share on other sites More sharing options...
Armando G Posted July 7, 2022 Report Share Posted July 7, 2022 This could be a short in the system somewhere or an issue with the FOB itself. If the FOB got wet, it might be sending a signal without you pushing the button. If there is a short on one of the actuators, it might be causing the remote module unit to think it needs to lock the doors (hence unlock then lock). If the remote module is going bad, this might be your sign. The last thing to check (or the first one) would be the fuse to the remote module. It's cheap, might just try to replace it. We had a similar issue on another car, turned out to be a bad module. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.