2013journey Posted December 3, 2022 Report Share Posted December 3, 2022 I just changed oil & filter in 2013 dodge journey sxt 3.6 v6 ... used 5w20 full syn oil. Oil preddure at start up was 90 psi. Is this normal or too high ? ' Quote Link to comment Share on other sites More sharing options...
2late4u Posted December 3, 2022 Report Share Posted December 3, 2022 yes, that is normal, and it goes down right away if you noticed it,,hope you used the right oil filter and also didnt over tighten your oil cap as they are easy to crack the oil body jkeaton, larryl and Armando G 3 Quote Link to comment Share on other sites More sharing options...
John/Horace Posted December 4, 2022 Report Share Posted December 4, 2022 Normal. So stick to 5w20 not 5w30 and synthetic. The torque spec for the oil filter cap, is printed on the top , 25 N/m I believe. Careful when buying filter element. There is two versions, yours is the older original design. Welcome to site. jkeaton and 2late4u 2 Quote Link to comment Share on other sites More sharing options...
2late4u Posted December 4, 2022 Report Share Posted December 4, 2022 25 Newton-Meter = 18.43905 Foot-Pound. Quote Link to comment Share on other sites More sharing options...
John/Horace Posted December 5, 2022 Report Share Posted December 5, 2022 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.