Maplicito Posted January 28, 2023 Report Share Posted January 28, 2023 (edited) The head unit in my 2013 Journey SXT was beginning to fail, so rather than shell out a lot of money on one of the few used OEM units I have seen available, I got an Android unit, and while it as a whole has been a great upgrade to the OEM unit, I have not found a way to turn on my power inverter. Do any of you know a way to turn on the power inverter, and keep it turned on without using the OEM head unit? If not - if I were to temporarily hook up my OEM head unit, and get it working long enough to turn on the power inverter, and then disconnect it, would the inverter stay on by default at that point? If I have to essentially lose the inverter by default, I'll just have to deal with it - having a solid Android unit that does everything else fine is a big enough plus for me to do so, but it would definitely be a huge plus to have access to that power plug. Thanks for any help you guys can offer! Edited January 28, 2023 by Maplicito Quote Link to comment Share on other sites More sharing options...
John/Horace Posted January 28, 2023 Report Share Posted January 28, 2023 It’s not a big inverter, 125 watts rings a bell, try looking it up. . Easy enough to add an inline fuse and shut off switch to the rear panel where it’s mounted. Cig lighter there is probably switched source. Could disable it and use same source, make sure to use fuses, probably a 10 amp max. Maplicito and larryl 2 Quote Link to comment Share on other sites More sharing options...
tsteves5 Posted January 28, 2023 Report Share Posted January 28, 2023 Wouldn't a stand-alone inverter be easier? They're not that expensive. https://www.amazon.com/AC120V-inverter-sockets-output-appliances/dp/B082RTV7YS/ref=sr_1_4?crid=1UHI2540JVZ0U&keywords=12v%2B250w%2Bpure%2Bsine%2Bwave%2Binverter&qid=1674928201&sprefix=12v%2B250w%2Bpure%2Bsine%2Bwave%2Binverter%2Caps%2C303&sr=8-4&th=1 Locosiete and Maplicito 2 Quote Link to comment Share on other sites More sharing options...
Maplicito Posted January 29, 2023 Author Report Share Posted January 29, 2023 10 hours ago, John/Horace said: It’s not a big inverter, 125 watts rings a bell, try looking it up. . Easy enough to add an inline fuse and shut off switch to the rear panel where it’s mounted. Cig lighter there is probably switched source. Could disable it and use same source, make sure to use fuses, probably a 10 amp max. 7 hours ago, tsteves5 said: Wouldn't a stand-alone inverter be easier? They're not that expensive. https://www.amazon.com/AC120V-inverter-sockets-output-appliances/dp/B082RTV7YS/ref=sr_1_4?crid=1UHI2540JVZ0U&keywords=12v%2B250w%2Bpure%2Bsine%2Bwave%2Binverter&qid=1674928201&sprefix=12v%2B250w%2Bpure%2Bsine%2Bwave%2Binverter%2Caps%2C303&sr=8-4&th=1 Both great ideas guys. I WOULD like to have the original equipment working if I could - it's probably an OCD thing on my part. Any idea where the actual switch to the rear panel is? I could definitely do the inline fuse thing if I could get to where the switch would be. Otherwise, a stand alone inverter is an option, but once again, I would love to have the original plug working if it's reasonably possible. Thanks for the responses. Quote Link to comment Share on other sites More sharing options...
Maplicito Posted January 29, 2023 Author Report Share Posted January 29, 2023 After doing a little reading, I realized some of the Dodge Journeys have a "hard" switch - mine had the 8.4 screen, so it only had the "soft" switch. So, that leaves me unsure of where to go to try and bypass the switch. If there is a schematic or video somewhere I could watch, that would help a lot. Quote Link to comment Share on other sites More sharing options...
Snapple Posted October 13 Report Share Posted October 13 Did you figure this out? I also upgraded my headunit to a carplay android unit and had no idea the power inverter was controlled by the OEM Head unit... I'll swap the unit back for a short period if it ment to get it working. Quote Link to comment Share on other sites More sharing options...
Locosiete Posted October 13 Report Share Posted October 13 3 hours ago, Snapple said: Did you figure this out? I also upgraded my headunit to a carplay android unit and had no idea the power inverter was controlled by the OEM Head unit... I'll swap the unit back for a short period if it ment to get it working. I'd try to find a wiring schematic, if it already has power from a relay then you could splice in a toggle switch to the remote connection. Or you could use the remote wire from the stereo to turn on relay so inverter only comes on with stereo so never have to worry about turning it off and draining your battery Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.