tboneforyou Posted June 9, 2010 Report Share Posted June 9, 2010 what is the deal here? sometimes when I start the vehicle and press the brake I still cant get into gear. shut it off and immediately restart and it goes right into gear? anyone else? Quote Link to comment Share on other sites More sharing options...
BUGS Posted June 9, 2010 Report Share Posted June 9, 2010 The shift lock is tied to the brake light switch. Perhaps there is an issue there. There is also a manual release. The following is from the manual (pgs 307-308) Brake/Transaxle Interlock System This vehicle is equipped with a Brake Transaxle Shift Interlock System (BTSI) that holds the shift lever in the PARK position when the ignition switch is in the LOCK position. To move the shift lever out of the PARK position, the ignition switch must be turned to the ON position, and the brake pedal must be depressed. BTSI Override There is an override for the BTSI that allows you to move the shift lever out of the PARK position if an electrical system malfunction occurs (i.e., dead battery). To activate the override system, perform the following steps: 1. Firmly apply the parking brake. 2. Insert the ignition key into the ignition switch and rotate it to the ON position. 3. Remove the cubby bin liner located in the center console behind the shift lever4. Insert a screwdriver or similar small tool into the hole at the front of the cubby bin and push the manual override release lever forward. 5. While holding the release lever forward, move the shift lever from PARK to NEUTRAL. 6. Release the manual override. Quote Link to comment Share on other sites More sharing options...
zmttoxics Posted June 15, 2010 Report Share Posted June 15, 2010 I have seen this on the Caliber. I can't remember if the dealership fixed it or if it just worked it self out... Quote Link to comment Share on other sites More sharing options...
tboneforyou Posted June 17, 2010 Author Report Share Posted June 17, 2010 Aaaargh, this is so annoying I'm OK with the vanity cover falling off. The wind noise and even the vibrating noise when turning left. However, if I have to take the cover off and manually disengage the shift stick to get into drive or reverse everytime I'm gonna lose my mind. No one else has this problem?? Its like the shift stick is locked no matter how hard I push the brake or if I have the parking brake on etc. Quote Link to comment Share on other sites More sharing options...
brendainsequim Posted May 28, 2014 Report Share Posted May 28, 2014 I have the same problem with my 2009 journey. If I put it in park and leave it running, (like sitting in drivethrus) then try to put it back in gear the lever moves to the right then sticks and will not go into any gears. I have to shut it off and restart to get her to shift. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.