email4walker Posted July 13, 2010 Report Share Posted July 13, 2010 I tried to remove the stick shifter knob. The middle chrome piece slides up. After that, I was stuck. There is no screws or anthing else hinting on what to do next. I even went to the deal and talked to the parts department. They pulled everything up on the computer, but they did not know what to do either. Any thoughts? Quote Link to comment Share on other sites More sharing options...
warbird24 Posted July 13, 2010 Report Share Posted July 13, 2010 Not sure myself. I know in my 2010 Camaro 6 Speed it was a pull off deal. Grab it with two hands and pull straight off. Darn near smacked myself in the forehead doing so. That works for that car, not sure if it'll work for the Journey. I'd be very careful with it myself. I am sure there is more mechanism inside that console that I wouldn't want to mess up. Chris Quote Link to comment Share on other sites More sharing options...
its2easy Posted August 26, 2010 Report Share Posted August 26, 2010 On 7/13/2010 at 10:28 AM, warbird24 said: Not sure myself. I know in my 2010 Camaro 6 Speed it was a pull off deal. Grab it with two hands and pull straight off. Darn near smacked myself in the forehead doing so. That works for that car, not sure if it'll work for the Journey. I'd be very careful with it myself. I am sure there is more mechanism inside that console that I wouldn't want to mess up. Chris Yes, all you do is pull straight up and it will come off. I upgraded my shifter and that is how I got the old one off. Quote Link to comment Share on other sites More sharing options...
email4walker Posted August 27, 2010 Author Report Share Posted August 27, 2010 On 8/26/2010 at 3:14 PM, its2easy said: Yes, all you do is pull straight up and it will come off. I upgraded my shifter and that is how I got the old one off. Do you have a picture of your new shifter installed? Quote Link to comment Share on other sites More sharing options...
Germax Posted September 5, 2010 Report Share Posted September 5, 2010 This is the same as the Avenger / Caliber etc. Just pull straight up. You can twist the lower chroom ring and then good luck with painting:-) Quote Link to comment Share on other sites More sharing options...
its2easy Posted September 7, 2010 Report Share Posted September 7, 2010 On 8/27/2010 at 4:46 AM, email4walker said: Do you have a picture of your new shifter installed? Yes. Go to the photo gallery and look for the 2010 Journey SRT folder. There is 2 interior shots you can open and see. When I put the shifter in I painted the chrome bezel around it black, and put black plastic over the shaft to sport it up some. warrior 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.