Jump to content

2017 SXT Voltage bouncing around


Recommended Posts

My mom’s 2017 SXT V6 has had its battery and alternator replaced, we replaced them because of a loud grinding noise and the car was dying. Now the car doesn’t die but the grinding noise is still there and when a load is applied the voltage drops a significant amount when I was doing the test the car got put in battery saving mode. 
 

Link to comment
Share on other sites

So if the grinding noise is still there it wasn't either one of those.

Did you replace the IBS sensor? That can cause voltage issues along with relays the TIPM and ground straps

Could your water pump be going out?

Link to comment
Share on other sites

or the  belt tensioner and or idler pulley as well, have it checked out for the noise problem first try using a eng stethoscope/long screwdriver against different engine parts that might be making the noise...after you find the problem, that should let your battery charged back up unless the new alternator is not working properly,,even new parts can be bad

Link to comment
Share on other sites

13 hours ago, larryl said:

So if the grinding noise is still there it wasn't either one of those.

Did you replace the IBS sensor? That can cause voltage issues along with relays the TIPM and ground straps

Could your water pump be going out?

I believe it might be the Ibs sensor, all the electronics are freaking out when battery gets low. Also the grinding noise happens intermittently

Link to comment
Share on other sites

21 hours ago, Altestry said:

I believe it might be the Ibs sensor, all the electronics are freaking out when battery gets low. Also the grinding noise happens intermittently

I do believe its NOT the IBS sensor,, FIRST find the noise /grinding that is your main problem and yes if your running the battery down the electronics will act crazy.when it is running have the alt checked at your local parts store to see if its putting out the correct charge also .check your idler arm pulley and the  belt tensioner for the grinding noise before replacing the IBS as it is expensive part,,do the cheap or free stuff before throwing parts at the journey,,,also please report back on what you find to be the problem /solution for others to learn from...good luck

Edited by 2late4u
Link to comment
Share on other sites

4 hours ago, 2late4u said:

I do believe its NOT the IBS sensor,, FIRST find the noise /grinding that is your main problem and yes if your running the battery down the electronics will act crazy.when it is running have the alt checked at your local parts store to see if its putting out the correct charge also .check your idler arm pulley and the  belt tensioner for the grinding noise before replacing the IBS as it is expensive part,,do the cheap or free stuff before throwing parts at the journey,,,also please report back on what you find to be the problem /solution for others to learn from...good luck

Sorry first time posting will report back tomorrow investigating the noise, also could i test the alternator at home I have a cheap multimeter 

and thanks for the help

Link to comment
Share on other sites

since you said the alt and the battery has been changed and then the prob developed I would also  check your battery cables to make sure they are clean AND tight we had one person complain of some problems and then later on said m bad one of the cables wasn't tight making intermittent contact causing their problems, it is can be the  simplest and and hardest problems to find loose connections and bad grounds as well on dodges

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...