Rgant_1981 Posted Thursday at 10:11 PM Report Share Posted Thursday at 10:11 PM Here’s my dilemma… I’ve installed a new brake power booster on my 2010 3.5l journey. Now I have brakes but the brake light is on while idling and flashing when I drive and I thought it supposed to be to erase itself after the install. I haven’t erase the code after the install which I can go do… I do not have fluid lost which and the brake pedal feels spongy (not tight) but I still have brakes. Which is odd!!! I was wondering if I missed a step during the installation. I didn’t remove the master cylinder because I bypassed the lines. Any help will be appreciated… oh there of course I’ve done it myself and it has over 150k miles Quote Link to comment Share on other sites More sharing options...
5rebel9 Posted Friday at 06:58 PM Report Share Posted Friday at 06:58 PM Brake light switch mis positioned under the dash at foot pedal? Quote Link to comment Share on other sites More sharing options...
John/Horace Posted yesterday at 02:01 AM Report Share Posted yesterday at 02:01 AM Remove power cable on battery for 5 mins. Try clearing codes. It was the correct part number for your year ? Quote Link to comment Share on other sites More sharing options...
Rgant_1981 Posted yesterday at 03:29 AM Author Report Share Posted yesterday at 03:29 AM Thanks!!! I will do that an give the results after I perform the task Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.