Wicked Jim Posted December 3 Report Share Posted December 3 Hello All need some help 2012 dodge journey no hot air all blend doors working new heater core (heater core is hot on inlet and outlet ) blower motor working as it should everything checks out and I still have little to no heat out the vents no matter what setting I use any suggestions? Thanks in advance all š Quote Link to comment Share on other sites More sharing options...
2late4u Posted December 4 Report Share Posted December 4 Might be time to have the dealership OR a qualified garage check it out YES they charge a dig charge but I have always found they apply such charge towards the repair, sounds like you have covered most of what you can,time to let the pros check it out.pleaseĀ report back on what you find out to be your problem for othersĀ to learn from jkeaton and Summer Solstice 2 Quote Link to comment Share on other sites More sharing options...
5rebel9 Posted December 4 Report Share Posted December 4 Engine size would be most helpful to post, the 2 choices in the NA market each have their own quirks. CEL on? full coolant and not boiling out???? jkeaton 1 Quote Link to comment Share on other sites More sharing options...
Dean H Posted December 4 Report Share Posted December 4 (edited) If you have this below- Ā EVIC screen located in the center of the instrument cluster. Use the keypad on the left side of the steering wheel. Arrow buttons and the back button. Ā Select coolant temperature. Ā Report back what the temperature is. Edited December 4 by Dean H Summer Solstice 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.