Srtified Posted February 11, 2013 Report Share Posted February 11, 2013 (edited) Duplicate post, removed by poster Edited February 11, 2013 by Srtified Quote Link to comment Share on other sites More sharing options...
Srtified Posted February 11, 2013 Report Share Posted February 11, 2013 Not sure of your build date but this flash is out there.NUMBER: 18-024-12 REV. A GROUP: Vehicle Performance DATE: November 03, 2012 SUBJECT: Flash: MIL Illumination P0108 - Manifold Absolute Pressure Sensor Circuit High And Transmission Shift Improvements OVERVIEW: This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. MODELS: 2012 - **2013** (JC) Journey NOTE: This bulletin applies to vehicle equipped with a 3.6L or 2.4L engine (sales code ERB or ED3) and a 6 speed automatic transmission (sales code DG2) built before **October 23, 2012 (MDH 1023XX)**. SYMPTOM/CONDITION: The customer may experience any of the following: · Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that P0108 - Manifold Absolute Pressure Sensor Circuit High has been set active or stored 3.6L engine. NOTE: **MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects 2012 model year vehicles only.** · 1 - 2 upshift clunk or bump 2.4L & 3.6L engines · 3 - 4 harsh upshift at closed throttle after a WOT stab in 1st or 2nd gear. 2.4L & 3.6L engines · 4 - 5 upshift clunk or bump 2.4L & 3.6L engines · 5 - 6 upshift clunk or bump 3.6L engine · 6 - 5 downshift clunk or bump 3.6L engine · 6 - 4 downshift clunk or bump 3.6L engine · RPM Fluctuating or Jerking feeling while operating in cruise control. Condition is more noticeable when the vehicle is going up and down grades.2.4L & 3.6L engines · 1 - 2 harsh upshift going down a grade 2.4L engine · 3 - 2 downshift clunk or bump 2.4L engine · 4 - 3 downshift clunk or bump 2.4L engine · **Improves the consistency of how shifts are controlled during upshifts “torque management”** Updating the software will correct the condition listed above. Just went into the dealership for my 8000 km oil change (as per owner's manual) and I complained about thr shifting and driveabality issues. They found and applied the above service bulletin and the vehicle runs like a champ!! Thanks to DodgeCares for supplying me with the necessary information to lead them to this bulletin. Quote Link to comment Share on other sites More sharing options...
Official Dodge Support DodgeCares Posted February 11, 2013 Official Dodge Support Report Share Posted February 11, 2013 Just went into the dealership for my 8000 km oil change (as per owner's manual) and I complained about thr shifting and driveabality issues. They found and applied the above service bulletin and the vehicle runs like a champ!! Thanks to DodgeCares for supplying me with the necessary information to lead them to this bulletin. Glad it worked. Quote Link to comment Share on other sites More sharing options...
nabeez Posted May 6, 2013 Report Share Posted May 6, 2013 Just dropped the car to Downsview Chrysler to apply the fix. I will keep you posted on the outcome. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.