putz6x Posted October 22, 2012 Report Share Posted October 22, 2012 Hi, I have currently installed a HID kit in our 2011 Journey and the LOW beams work perfect. The fogs on the other hand have been weird. With the fogs back in the spring when installed would come on for a second or two blink on stay on for a few secs then back of and then nothing. Reported this to my supplier and they shipped another set of ballasts and same thing happens. So when messing around a bit they finally worked. Worked all summer no problem but now that the fall is here they are acting up again either not turning on or this blinking issue again. i ahve tried the ballast on my truck with no issues. Could this be a cold weather thing for our Journey not enough power now all of a sudden. I'm thinking of getting a relay harness for the fogs to see if that works. But why work for 4 months then start acting strange again? Anyone have some input? Thanks Quote Link to comment Share on other sites More sharing options...
chopson Posted October 27, 2012 Report Share Posted October 27, 2012 Have it professionally done like most of my freinds have done. They had same issue. Or the kit is defective. aftr 4months it should not. If bought off of ebay etc not always good. Quote Link to comment Share on other sites More sharing options...
pegcitysxt Posted December 29, 2012 Report Share Posted December 29, 2012 Hey there! Do you have wiring harnesses for your low beams? if so, great! if not, i can pretty well garuntee you need harnesses for both pairs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.