Jump to content

Curb Idle Speed


Srtified

Recommended Posts

  • Official Dodge Support

ANy body know what factory spec is for the 3.6L idle speed?? I'm at just over 500rpm at a light and find that way too low, everybody else this low???

Srtified,

Engine idle speed will vary depending on engine temp, A/C on or off, etc. Chrysler targets for as low an RPM as possible to reduce fuel usage and Greenhouse Emissions. Engine RPM will be high when the engine is first started and drop as the engine temp increases.

Hope that answers your question.

Link to comment
Share on other sites

Srtified,

Engine idle speed will vary depending on engine temp, A/C on or off, etc. Chrysler targets for as low an RPM as possible to reduce fuel usage and Greenhouse Emissions. Engine RPM will be high when the engine is first started and drop as the engine temp increases.

Hope that answers your question.

It helps but what you're telling me is at a stoplight my rpms will be lower and at highway speed, they'll be higher....Really??? No kidding!!! I sorta knew that, lol!!

So it seems that my idle speed is typical...I don't like it being that low!!! I live in a cold climate and with short trips I'd like to see that idle up a little bit, say 650-700 or so. I'll check with my techs to see if they can alter idle speed with starscan.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...