Lobitz68 Posted March 13, 2014 Report Share Posted March 13, 2014 On 3/12/2014 at 11:34 PM, cskmom said: Hello....So what is the alternative then i.e. the "something else" mentione din your post? I concur with the HID concerns...you don't want all that to happen when you are in dire need of lights being on pronto HIRs are a alternative that are gaining momentum lately... More lumens and a little bit whiter light... Quote Link to comment Share on other sites More sharing options...
Lobitz68 Posted March 13, 2014 Report Share Posted March 13, 2014 On 3/13/2014 at 3:31 AM, DTSGUY said: Nope still no flickering. I used the Kit which had the Bulbs and Ballasts. I also had to purchase the Resistors and Harness. Is there a capacitor on your relay harness? You have resistors on both sides I assume? Quote Link to comment Share on other sites More sharing options...
Totemus Posted March 13, 2014 Report Share Posted March 13, 2014 I have Mopar specific HID kit from TRS, they have capacitors and resistors: http://www.theretrofitsource.com/hid-systems/morimoto-elite-hid-system-mopar-low-beam.html. However, with the below zero temperatures this year there was slight flickering on one side. Quote Link to comment Share on other sites More sharing options...
Totemus Posted March 13, 2014 Report Share Posted March 13, 2014 Quote Link to comment Share on other sites More sharing options...
Lobitz68 Posted March 14, 2014 Report Share Posted March 14, 2014 On 3/13/2014 at 1:48 PM, Totemus said: I have Mopar specific HID kit from TRS, they have capacitors and resistors: http://www.theretrofitsource.com/hid-systems/morimoto-elite-hid-system-mopar-low-beam.html. However, with the below zero temperatures this year there was slight flickering on one side. Flickering during warm up, or once they were already warm? Quote Link to comment Share on other sites More sharing options...
Totemus Posted March 14, 2014 Report Share Posted March 14, 2014 Both. It happened, however, only when very cold outside (below 0F). No issues now, but I didn't really understand the pattern and reason of flickering. Quote Link to comment Share on other sites More sharing options...
DTSGUY Posted March 14, 2014 Report Share Posted March 14, 2014 On 3/13/2014 at 12:47 PM, Lobitz68 said: Is there a capacitor on your relay harness? You have resistors on both sides I assume? If there is a capacitor then its built into the relay harness cause I didnt see one. Yes I have resistors on both sides. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.