Justin Blaufuss Posted November 28, 2013 Report Share Posted November 28, 2013 I have an 09 Journey R/T. The esp, heated seats, and power inverter buttons have stopped working. The Hazard button does work. Any ideas? Quote Link to comment Share on other sites More sharing options...
DodgeFan72 Posted November 28, 2013 Report Share Posted November 28, 2013 If you haven't already, I would check for a blown fuse first. Trains123 1 Quote Link to comment Share on other sites More sharing options...
Justin Blaufuss Posted November 28, 2013 Author Report Share Posted November 28, 2013 If you haven't already, I would check for a blown fuse first. I will check that out, would one fuse disable all those switches? Quote Link to comment Share on other sites More sharing options...
jkeaton Posted November 29, 2013 Report Share Posted November 29, 2013 Not sure, the fuse box cover should say what all is on that circuit. If not, maybe the owners manual? Quote Link to comment Share on other sites More sharing options...
Justin Blaufuss Posted December 5, 2013 Author Report Share Posted December 5, 2013 Not sure, the fuse box cover should say what all is on that circuit. If not, maybe the owners manual? Thank you. I found the Switch Bank fuse and it looked good. I re-seated it and the switch bank controls started working again. Thank you! Quote Link to comment Share on other sites More sharing options...
2late4u Posted December 5, 2013 Report Share Posted December 5, 2013 always check your fuses first and carefully look it real good , as i just was working on my daughters van and checked the fuse real quick looked good then spent 1hr fooling around with the outlet, checked the fuse box again real quick yes it looked good spent alot of time messing around with the problem and decided to pull the fuse and it was slightly burned in half on the side of the fuse not the top where it normally burns thur.... also be carefull to put the fuse back in correctly one time my son pulled a fuse and put it back and the car ran like shit, i checked it all out couldnt fig out what was wrong so had a mech. check it out and after a 250.00 bill for compleate tuneup new wires and a few other little things it ended being when my son put the fuse back in 1 of 2 flat blades got put in the slot and the other one missed the slot and wasnt making connection so the fuel injectors were malfuntioing took the mech a long time to find this. so be real carefull when removing AND replacing your fuses Quote Link to comment Share on other sites More sharing options...
jdeleon112_82 Posted April 3, 2014 Report Share Posted April 3, 2014 II also have that problem with the esp and heated seats not working. Checked all the fuses and they all seem to be good and well seated. Any ideas would be great. Thanks Quote Link to comment Share on other sites More sharing options...
jkeaton Posted April 3, 2014 Report Share Posted April 3, 2014 II also have that problem with the esp and heated seats not working. Checked all the fuses and they all seem to be good and well seated. Any ideas would be great. Thanks Check the relays as well. Quote Link to comment Share on other sites More sharing options...
2late4u Posted April 3, 2014 Report Share Posted April 3, 2014 try removing the fuse and reinsertering again to see if that helps (like rebooting your computer) good luck..... Quote Link to comment Share on other sites More sharing options...
SGIFL Posted November 30, 2014 Report Share Posted November 30, 2014 Thank you. I found the Switch Bank fuse and it looked good. I re-seated it and the switch bank controls started working again. Thank you! WHICH FUSE/S NUMBER/S please Quote Link to comment Share on other sites More sharing options...
SGIFL Posted November 30, 2014 Report Share Posted November 30, 2014 Thank you. I found the Switch Bank fuse and it looked good. I re-seated it and the switch bank controls started working again. Thank you! WHICH FUSE/S NUMBER/S please Quote Link to comment Share on other sites More sharing options...
SGIFL Posted November 30, 2014 Report Share Posted November 30, 2014 WHICH FUSE/S NUMBER/S please Quote Link to comment Share on other sites More sharing options...
larryl Posted December 1, 2014 Report Share Posted December 1, 2014 Look in the manual it gives you all the info you need jkeaton 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.