onetime093 Posted November 9, 2014 Report Share Posted November 9, 2014 I have a 2013 journey sext with flowmaster 50 series exhaust looking to put on Jeep SRT 8 rims in black on does anyone know if they will fit or have them on. Taylor96 1 Quote Link to comment Share on other sites More sharing options...
onetime093 Posted November 9, 2014 Author Report Share Posted November 9, 2014 Sorry damn auto correct SXT Quote Link to comment Share on other sites More sharing options...
hockey_puck Posted November 10, 2014 Report Share Posted November 10, 2014 Nope. http://www.roadkillcustoms.com/hot-rods-rat-rods/Wheel-Bolt-Pattern-Cross-Reference-Database.asp#axzz3GoIMk21N H.P. Quote Link to comment Share on other sites More sharing options...
dhh3 Posted November 10, 2014 Report Share Posted November 10, 2014 Welcome to the forum. When I had my Nitro, I searched doge nitro 20" wheels on ebay, and found replicas: all black, all chrome, or chrome with black inside the spokes. You might search dodge journey 19" wheels, or whatever size that you are looking for. Quote Link to comment Share on other sites More sharing options...
Bubba Posted November 10, 2014 Report Share Posted November 10, 2014 (edited) I have jeep srt viper replica rims on my 2010 , same bolt pattern . 5 x 5 or 5 x 127 metric . they are 20 x 9 inch and had no problems . Another guy on here lawdog has the jeep srt rims on his, should check with him . Most places will tell you that a rim wider than 7 inch will not fit , 9 inch fit fine 10 will need a spacer . Edited November 10, 2014 by Bubba DTSGUY 1 Quote Link to comment Share on other sites More sharing options...
ltdjourney Posted November 10, 2014 Report Share Posted November 10, 2014 if they are 5x127 and 35deg off set should fit Quote Link to comment Share on other sites More sharing options...
Lawdog1911 Posted November 10, 2014 Report Share Posted November 10, 2014 I would stick with repro 20x8 all around. I had the 20x10 on the rear and they were too deep to use without 1.5 - 2 inch adapter spacers. They were rubbing the exhaust and stuck out about an inch past the wheel wells. As long as they are 5x5 ( 5x127) 20x8 - 20x9 you should be good. ( If you use 1.5 inch adapters, your wheel studs will need to be cut down some for the wheels to sit flat against the hub on the spacer adapter. ) Quote Link to comment Share on other sites More sharing options...
DTSGUY Posted November 11, 2014 Report Share Posted November 11, 2014 ​I have 20x9 Viper Replicas with 275/40 tires and they don't stick out at all. I love they way they look. But like people here have said you can easily find the Jeep Replicas that will fit just fine. Lawdog1911 1 Quote Link to comment Share on other sites More sharing options...
Cody Chornobey Powley Posted January 27, 2016 Report Share Posted January 27, 2016 What if the bolt pattern is the same.but the bore size is different? Quote Link to comment Share on other sites More sharing options...
SeanTacular Posted January 27, 2016 Report Share Posted January 27, 2016 (edited) Hub rings should be used so you don't get vibration at high speed. Edited January 27, 2016 by SeanTacular Quote Link to comment Share on other sites More sharing options...
dhh3 Posted January 27, 2016 Report Share Posted January 27, 2016 If you use spacers, make sure that they are hub centric. Quote Link to comment Share on other sites More sharing options...
Cody Chornobey Powley Posted January 27, 2016 Report Share Posted January 27, 2016 Found some rims but the hub was off a few mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.