Lawdog1911 Posted January 7, 2015 Report Share Posted January 7, 2015 Does any one know how the caps on the roof rack come off? I am going to repaint the aluminum bars and I don't want to break the end cap covers. Quote Link to comment Share on other sites More sharing options...
dhh3 Posted January 7, 2015 Report Share Posted January 7, 2015 (edited) I'm thinking that if you slid a plastic panel removal tool on the rear edge it would disengage from the bottom, and then rotate up - back to front.. I just went out and looked. I'd try it for you but it is too cold: the plastic might crack Edited January 8, 2015 by dhh3 Quote Link to comment Share on other sites More sharing options...
bigtsr Posted January 8, 2015 Report Share Posted January 8, 2015 The end caps have 3 tangs/clips on them , 1 at the contoured end and 1 each side of the end that covers the side rail. Squeeze the rail side inward and lift toward the contoured end. ltdjourney 1 Quote Link to comment Share on other sites More sharing options...
Lawdog1911 Posted January 8, 2015 Author Report Share Posted January 8, 2015 Thanks I will try it when it warms up some. I am painting them body color as well was the cross bars. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.