youngblud Posted April 9, 2009 Report Share Posted April 9, 2009 My ESP/BAS light stays on, with the traction control warning after I start my Journey. The traction control can be turned off by pressing 2 times the ESP off button. But the other light remains on. Wonder why?? Quote Link to comment Share on other sites More sharing options...
noren Posted April 9, 2009 Report Share Posted April 9, 2009 Quote the manual: "If the ESP/BAS Malfunction Indicator Light turns on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system, or both. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected." /Andreas Quote Link to comment Share on other sites More sharing options...
berner Posted September 16, 2010 Report Share Posted September 16, 2010 Check so u dont have and prb with the HUBs or any ABS sensors prb. The gearbox u have in ur car is manufatured in Germany ( Porche getrag ) 6 speed dubble clutch. I had some prb with a JC with the same prb and it was the HUB right front that was broken. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.