LeoOrtz7 Posted April 5, 2015 Report Share Posted April 5, 2015 Hi.. I bought a Pioneer DEH-X66BT radio, wire harness and antenna adapter. I successfully removed stock radio. Wire harness and radio wires all connected. Dash kit installed. There's a red wire that needs to be connected to the radio. I don't know where to connected and can't find the interior fuse box. Please help Thanks! Quote Link to comment Share on other sites More sharing options...
dhh3 Posted April 5, 2015 Report Share Posted April 5, 2015 (edited) Find the 15a power wire to the old radio, and tap into that wire. That is what the tech did to power my Kicker Underseat Sub. Edited April 7, 2015 by dhh3 Quote Link to comment Share on other sites More sharing options...
LeoOrtz7 Posted April 5, 2015 Author Report Share Posted April 5, 2015 (edited) I will try... Thanks...! Edited April 5, 2015 by LeoOrtz7 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted April 5, 2015 Report Share Posted April 5, 2015 Good luck. If the new radios are like the old ones, the power will be in the smaller connector. I see the big gray connector in one of your photos. That is for the speakers. Also, the antenna on the DJ is powered. You have to make sure that this is hooked up too. Otherwise, your reception will be lousy Quote Link to comment Share on other sites More sharing options...
LeoOrtz7 Posted April 6, 2015 Author Report Share Posted April 6, 2015 So i look for the 15a wire in the gray connector or where? Quote Link to comment Share on other sites More sharing options...
LeoOrtz7 Posted April 6, 2015 Author Report Share Posted April 6, 2015 I successfully installed the radio.. I used a T-Tap connector in one of the car lighter positive wire and works..! dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted April 7, 2015 Report Share Posted April 7, 2015 I successfully installed the radio.. I used a T-Tap connector in one of the car lighter positive wire and works..! This is a good idea too. The power wire, I believe, is not in the gray connector, but is in the small connector; that is, if these new radios connect like the MyGigs. MyGigs had 3 connectors: big white - video, big gray - speakers, small one in the center, if I am remembering correctly, power and also power for the antenna. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.