bfurth Posted April 7, 2015 Report Share Posted April 7, 2015 So I just got my DJ back from the body shop after a 2 week mess from getting hit in a three car collision. I noticed last night that there was paint overspray on the driver window. Took it back to the body shop this morning and they came out with steel wool to clean it off - it was the lower front corner, and it would never have affected visibility, so I'm not overly concerned with steel wool having been used there. The problem is the clear coat overspray on the windshield. I'm not willing to let them put anything abrasive near it. So, I need a good clay bar option for removing it. The clear coat was baked on at 180 (according to the shop owner) for a few hours, but it's still not fully cured (needs 30 days). It's a very fine mist all across the entire windshield (and inevitably the rest of the car I'm sure). Any specific recommendations, or will any old clay bar do? Quote Link to comment Share on other sites More sharing options...
onecrazyfoo4u Posted April 7, 2015 Report Share Posted April 7, 2015 For the windows I always use a razor blade, held at 45deg angle or so. Just scrape all along every window. It doesn't scratch at all...like steel wool might. For paint, I would use any old claybar and get to work...I use meguiars. But, I would let the new paint/clear coat cure for a few weeks before claybaring. bfurth and Journey_SeXT 2 Quote Link to comment Share on other sites More sharing options...
jkeaton Posted April 7, 2015 Report Share Posted April 7, 2015 Paint thinner works just as well. I had overspray on my Sebring. I tried the razor blade, tried clay bar, tried rubbing compound...nothing got rid of it completely. Finally I got some paint thinner and wiped it off. Journey_SeXT and bfurth 2 Quote Link to comment Share on other sites More sharing options...
bfurth Posted April 7, 2015 Author Report Share Posted April 7, 2015 For the windows I always use a razor blade, held at 45deg angle or so. Just scrape all along every window. It doesn't scratch at all...like steel wool might. For paint, I would use any old claybar and get to work...I use meguiars. But, I would let the new paint/clear coat cure for a few weeks before claybaring. I was planning on doing the body panels early next month. At least clearcoat is not the polyurethane I got all over my T&C Quote Link to comment Share on other sites More sharing options...
bfurth Posted April 7, 2015 Author Report Share Posted April 7, 2015 Paint thinner works just as well. I had overspray on my Sebring. I tried the razor blade, tried clay bar, tried rubbing compound...nothing got rid of it completely. Finally I got some paint thinner and wiped it off. Any special precautions for that, or just apply to rag, tape off the panels around the windshield, and wipe gently? Quote Link to comment Share on other sites More sharing options...
jkeaton Posted April 7, 2015 Report Share Posted April 7, 2015 I didnt tape off anything. Just put some on a rag and wiped the windows off. Quote Link to comment Share on other sites More sharing options...
hockey_puck Posted April 7, 2015 Report Share Posted April 7, 2015 Gasoline will take it off the glass. I once had a guy run over a purple spray can lying on the road beside me and it exploded spraying purple everywhere. The gas worked like a charm. Don't use the gas on fresh paint! One thing. No smokes while doing this...... H.P. Journey_SeXT 1 Quote Link to comment Share on other sites More sharing options...
2late4u Posted April 7, 2015 Report Share Posted April 7, 2015 actually i use double 00 or 000 steel wool on my windshield once to twice a yr it will not hurt or scratch the glass and it removes all the road chemicals and imperfections on top of the glass. smooth as babies but after its done Quote Link to comment Share on other sites More sharing options...
dhh3 Posted April 7, 2015 Report Share Posted April 7, 2015 You could use Acetone, but make sure you are outside. You will get high as a kite from the fumes: you will completely forget what you are even doing! BrianS and Medabum 2 Quote Link to comment Share on other sites More sharing options...
bfurth Posted April 13, 2015 Author Report Share Posted April 13, 2015 Fortunately, no chemicals were needed. A quick swipe with a clay bar and the windshield is back to being silent when the wiper blades run over it (dry - and only done once to test for how clean I had gotten the windshield). This is now two issues I've fixed (only the first for my Journey) with nothing more than wax and "detailing spray." Seriously - how did I not know of the usefulness of this stuff until last year? Quote Link to comment Share on other sites More sharing options...
jkeaton Posted April 13, 2015 Report Share Posted April 13, 2015 I love the detailing spray. Use it every wash. Quote Link to comment Share on other sites More sharing options...
bfurth Posted April 13, 2015 Author Report Share Posted April 13, 2015 I love the detailing spray. Use it every wash. I used what was left in the bottle (the clay kit I had was what was left over from removing polyurethane from the windshield of my T&C) to clean up some water spots after the windshield was clean. And then used it to clean the door jambs, and what looks like adhesive residue on the chrome lettering on the back from whatever had been taped on to protect it from the first paint work that had to be done. Early next month (once the front body work paint is cured), the whole thing is getting clayed and waxed (got Maguiar's sitting at home waiting to get opened for those jobs). In the mean time, weekly washing. I love how polished it looks right now. I washed/waxed the T&C yesterday, and looking at either of them, you can see the reflection of itself in the reflection of the other vehicle on the body of the first one (T&C in reflection of Journey on T&C or Journey in reflection of T&C on Journey). It's a pretty cool effect. Quote Link to comment Share on other sites More sharing options...
Journeyman425 Posted April 14, 2015 Report Share Posted April 14, 2015 I love how polished it looks right now. I washed/waxed the T&C yesterday, and looking at either of them, you can see the reflection of itself in the reflection of the other vehicle on the body of the first one (T&C in reflection of Journey on T&C or Journey in reflection of T&C on Journey). It's a pretty cool effect. Here's my 300M as seen off of the driver's side of the Journey: Quote Link to comment Share on other sites More sharing options...
rolly Posted April 14, 2015 Report Share Posted April 14, 2015 Here's my 300M as seen off of the driver's side of the Journey: Nice mural!!! Journeyman425 1 Quote Link to comment Share on other sites More sharing options...
BrianS Posted April 15, 2015 Report Share Posted April 15, 2015 You could use Acetone, but make sure you are outside. You will get high as a kite from the fumes: you will completely forget what you are even doing! +1 on the acetone. I've used it to remove sticker residue from paint with no harm, so glass should be fine. Quote Link to comment Share on other sites More sharing options...
Lobitz68 Posted April 17, 2015 Report Share Posted April 17, 2015 I was going to tell you to just use the clay bar (more than sufficient), but it sounds like I'm too late and you discovered how easy it was on your own. Quote Link to comment Share on other sites More sharing options...
bfurth Posted April 20, 2015 Author Report Share Posted April 20, 2015 My Journey, as seen in the reflection on my T&C on my Journey. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.