bramfrank Posted April 19, 2015 Report Share Posted April 19, 2015 Here's an interesting tidbit I came across: You can directly capture screen shots from your 8.4" UConnect to a USB flash drive,You hold down the drivers side up temperature and down temperature button and the rear defroster button, ALL AT ONCE!After a couple of seconds, you will see the screen flash, then about a second or two after, you should get a "screen shot successful" message!It will save them as 640 x 480 *.BMP picture files. cody168 1 Quote Link to comment Share on other sites More sharing options...
redtomatoman Posted April 19, 2015 Report Share Posted April 19, 2015 Interesting. Any reason to actually do that? You'd need to have your USB constantly ready. Peace. Quote Link to comment Share on other sites More sharing options...
bramfrank Posted April 19, 2015 Author Report Share Posted April 19, 2015 Garmin navigators all do this. I suppose you might want to capture an image from your backup camera; Save the screen from the satellite radio to capture a song title; Grab an error message or an errant navigation screen. You might want to record your unit's configuration for posterity or grab an image from a DVD. There's got to be a reason for it. I know that when I was arguing with Sirius over my subscriptions I took a picture of the dealer screen showing mine and e-mailed it to them . . . they didn't want to enable Travel Link in my new radio, claiming I didn't have it in the old, which, of course I did . . . not that the radio actually implemented any of the Travel Link menu items . . . but it was the principle of the matter - I could have done a screen grab, instead of taking a picture with my phone OK, these days the need is mitigated by the fact that we all carry portable cameras with us . . . . . . .But I didn't plan the feature, I just reported about it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.