Klemzy668 Posted July 20, 2015 Report Share Posted July 20, 2015 I have new LED instrument gauge lights that I would like to put in my Journey. It is a 2009 SXT and I was wondering how to pull the instrument cluster so I can replace the bulbs. Quote Link to comment Share on other sites More sharing options...
bigtsr Posted July 20, 2015 Report Share Posted July 20, 2015 Welcome to the forum. I believe the cluster bulbs are actually soldered into the PCB , I could be wrong but from past Mopars I have owned this has been the case. dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted July 21, 2015 Report Share Posted July 21, 2015 Welcome to the forum. It is true that the lights may be soldered to the circuit board. If you are good with a soldering iron, you can remove the bulbs and replace them with LEDs. Guys on the Nitro forum did it. I'm used to looking at my 2014 dash, which is different than your so I can't begin to tell you where to start. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.