van7188 Posted August 20, 2015 Report Share Posted August 20, 2015 I just had uhaul install a trailer hitch on my 2012 sxt. I plan to tow a 5x8 trailer to hold our luggage for a road trip vacation. what is the recommended rise of the ball mount. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
jkeaton Posted August 20, 2015 Report Share Posted August 20, 2015 Not even sure there is a definite spec for that. Hopefully someone else here can help you out. Welcome to the forum. dhh3 1 Quote Link to comment Share on other sites More sharing options...
carritt11 Posted August 20, 2015 Report Share Posted August 20, 2015 All depends on the trailer. The goal is to have the trailer as level as possible so it may be best to buy a couple and test. Good way to make use of the return policy haha. I'm guessing a 2" to 3 1/4" rise. dhh3 1 Quote Link to comment Share on other sites More sharing options...
Woah322 Posted August 20, 2015 Report Share Posted August 20, 2015 (edited) If anything you can always unscrew the ball, flip the hitch to give it a slight rise to compensate for the weight drop. I tow a 5x8, can't imagine how much luggage you got to need such a large trailer. Lol Edited August 20, 2015 by Woah322 dhh3 and jkeaton 2 Quote Link to comment Share on other sites More sharing options...
Lobitz68 Posted August 20, 2015 Report Share Posted August 20, 2015 (edited) Set the trailer level and measure to the top of the tongue. Next, measure the receiver height on your DJ. Using the 2 measurements you should be able to figure out the rise/drop you need for your ball mount. Here is some reading for you: https://www.etrailer.com/faq-ballmount.aspx Edited August 20, 2015 by Lobitz68 onecrazyfoo4u, jkeaton and dhh3 3 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted August 20, 2015 Report Share Posted August 20, 2015 Exactly: what he said ^^ jkeaton 1 Quote Link to comment Share on other sites More sharing options...
Rebus Posted August 21, 2015 Report Share Posted August 21, 2015 Measuring will help you definitively know the correct drop/rise for your application; however, to get you started, this is the ball mount I use for both my utility trailer and boat trailer - 3/4" rise. dhh3 1 Quote Link to comment Share on other sites More sharing options...
jkeaton Posted August 21, 2015 Report Share Posted August 21, 2015 Will the OP be back?? Stay tuned.....round 2. dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted August 22, 2015 Report Share Posted August 22, 2015 Tick, tock. Tick, tock. jkeaton 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.