andavaka Posted September 22, 2015 Report Share Posted September 22, 2015 Hi guys, A local salvage is stripping a 2015 R/T fitted with a factory towbar, will this fit my 2010 SXT. dhh3 1 Link to comment Share on other sites More sharing options...
dhh3 Posted September 22, 2015 Report Share Posted September 22, 2015 As far as I know, there have never been any major structural changes to the DJ since it was introduced. I have only had mine for a year, but I do not see any reason why it would not fit. The holes for the hitch are already in the rear frame rails. Link to comment Share on other sites More sharing options...
Lobitz68 Posted September 22, 2015 Report Share Posted September 22, 2015 Simplest way to find out would be to check part numbers with the dealer... Even if they aren't identical, they with likely have the same number with a different letter designation at the end. dhh3, 11journeybama and jkeaton 3 Link to comment Share on other sites More sharing options...
andavaka Posted January 28, 2016 Author Report Share Posted January 28, 2016 Sorted, fitted 100% wiring was a bit of a issue but was sorted. dhh3 1 Link to comment Share on other sites More sharing options...
dhh3 Posted January 28, 2016 Report Share Posted January 28, 2016 Great news. It worked! Link to comment Share on other sites More sharing options...
jkeaton Posted January 28, 2016 Report Share Posted January 28, 2016 Locking thread since you say the same thing in this one. http://www.dodgejourneyforum.com/topic/7840-dj-2010-res-upgrade-to-rb2-done-urgent-questions/ dhh3 1 Link to comment Share on other sites More sharing options...
Recommended Posts