UltraNutZ Posted December 22, 2015 Author Report Share Posted December 22, 2015 oh.. i didn't pay anywhere near $37k either. More in the range of $28k so did a little investigating. the stock sensor part # 68230113AB is a 3 pin sensor and obviously only for HVAC the sensor I replaced it with is 68230114AB and is a 4 pin sensor so it's for light/HVAC to further that, I went and pulled the sensor from the dash of my 2016 300s and it's the same 68230114AB part # Also same color wires on the 4 pin harness as what's in the journey. dhh3 1 Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted December 22, 2015 Author Report Share Posted December 22, 2015 Oh, and I bought it for the color! First time buying a car just for the color! haha.. what are you a Texas Longhorn fan? dhh3 1 Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted December 22, 2015 Author Report Share Posted December 22, 2015 (edited) here's the sticker off the Journey https://www.dropbox.com/s/owpj02058ob5x6v/WindowSticker.pdf?dl=0 I was off a little on the numbers. Must be the MSRP i was thinking was $37k Edited December 22, 2015 by UltraNutZ dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 23, 2015 Report Share Posted December 23, 2015 (edited) here's the sticker off the Journey https://www.dropbox.com/s/owpj02058ob5x6v/WindowSticker.pdf?dl=0 I was off a little on the numbers. Must be the MSRP i was thinking was $37k On my window sticker, under Optional Equipment, it says: Customer Preferred Package 28V, but there is no pricing listed. So it must be part of what comes standard (?). Your sticker says: $1,100. I have all of these things that are listed, so now I now what it is! Customer Preferred Package 28V $ 1,100 Crossroad Equipment Group Leather Seats with Sport Mesh Inserts Premium Door Trim Panel with Stitching Cargo Net Radio 8.4 8.4-Inch Touchscreen Display Light Gray Accent Stitching Power 6-Way Driver Seat Power 4-Way Driver Lumbar Adjust Front-Passenger Fold-Flat Seat Passenger In-Seat Cushion Storage Passenger Assist Handles Front and Rear Aimable LED Lamps Overhead Console Air Conditioning with 3-Zone Automatic Temp Control Sun Visors with Illuminated Vanity Mirrors Went to my Dealer again today, and again was told that Auto Headlights can not be added! We'll see about that, after I install the new parts! Edited December 23, 2015 by dhh3 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 23, 2015 Report Share Posted December 23, 2015 (edited) haha.. what are you a Texas Longhorn fan? This is the position it was parked when I first laid eyes on it: Weep! I love this color. Great color for a HellCat! Edited December 23, 2015 by dhh3 Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted December 23, 2015 Author Report Share Posted December 23, 2015 my autoenginuity tool should be here tomorrow. dhh3 1 Quote Link to comment Share on other sites More sharing options...
xcaliber81 Posted December 24, 2015 Report Share Posted December 24, 2015 (edited) My loaded r/t awd was 46000. I could only get it down to 39000. Edited December 24, 2015 by xcaliber81 dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 24, 2015 Report Share Posted December 24, 2015 My loaded r/t awd was 46000. I could only get it down to 39000. Now we are in Jeep Commander territory from 2006! Quote Link to comment Share on other sites More sharing options...
xcaliber81 Posted December 25, 2015 Report Share Posted December 25, 2015 All the dealers I went to were the same. I was in a bit of a rush as my last journey got totalled and I had no vehicle. Tbh it's only 160 per month more. dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 25, 2015 Report Share Posted December 25, 2015 my autoenginuity tool should be here tomorrow. Let us know how it works. The Auto Headlight Code has been removed again from the Dealer's list. This is why they can not activate them. The same thing for DRLs happened last year. The Code disappeared but mysteriously reappeared. So, I had my DRLs turned on. I am going to install the switch and sensor when they arrive, and patiently wait for the Code to reappear. When you say that your lights come on with the ignition, is the switch in the Auto position? Do the lights still work as normal in the other positions? Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted December 28, 2015 Author Report Share Posted December 28, 2015 didn't get a chance with family in town to fool with it. Hopefully today as I need to activate the enhanced codes during normal business hours. stay tuned. dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 28, 2015 Report Share Posted December 28, 2015 I am curious how you will do this as Chrysler has removed the code for auto headlights. Again: do your headlights work normal in the other positions? You said that they came on as soon as you started it: was the light switch in auto position? I want to go ahead and install the switch when it comes today, along with the sensor, but not if the headlights will always be on. Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted December 28, 2015 Author Report Share Posted December 28, 2015 I am curious how you will do this as Chrysler has removed the code for auto headlights. Again: do your headlights work normal in the other positions? You said that they came on as soon as you started it: was the light switch in auto position? I want to go ahead and install the switch when it comes today, along with the sensor, but not if the headlights will always be on. according to AE, you don't need those Chrysler Codes. We'll see.... sorry thought I answered that for you already... switch in auto position turn car on, lights come on and stay on turn car off, lights go off with the exit delay switch in normal off position - functions just like yours does now. So you can put it in, but if you want your headlights to stay off until you're ready to turn them on then you'll need to have it in the normal off position. dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 28, 2015 Report Share Posted December 28, 2015 I just received the sensor and switch. The sensor is correct: it has 4 pins, where my original has three. However, the switch is identical to the switch in the car. I'll have to message the seller on ebay, to see what is going on. P/N on new switch: 68072001AC. Something weird is going on. Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted December 29, 2015 Author Report Share Posted December 29, 2015 yeah that's the stock part # for what's already there. I plugged up the AE tool, got everything activated, played around for a few minutes with it but had to run out with the wife for a few minutes that turned into 4+ hours so didn't get anything done with that. I'll fool with it a little later this evening again. I'll take some pics of the screens so you guys can see this thing, it's pretty damn cool what it can do and test in many of the body, steering, dash, etc. modules in the car. dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 29, 2015 Report Share Posted December 29, 2015 (edited) This is the reply that I received from the seller on ebay: per the catalog part number 68072001ac is for foglights no auto lamps: this is already installed in my DJ!part number 4602890ac is for auto lampspart number 56046258ac is for auto lamps with fog lamps: this is the one that I need.Kind Regards,Matthew Maybe it is because yours is a 2016 and mine is a 2014. Edited December 29, 2015 by dhh3 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 29, 2015 Report Share Posted December 29, 2015 (edited) Somehow you got your pictures of the switches reversed. I just pulled mine out: 68072001AC: No Auto, with Fog, just as he stated in his reply to me. So, I actually ordered the switch that I already have. I'm working with the ebay seller to see if he will exchange the switch for me. Edited December 29, 2015 by dhh3 Quote Link to comment Share on other sites More sharing options...
xcaliber81 Posted December 29, 2015 Report Share Posted December 29, 2015 (edited) You said you were able to activate the auto lights? I'm curious about this tool if you can activate sales codes I may pick 1 up myself. Edited December 29, 2015 by xcaliber81 UltraNutZ and dhh3 2 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 29, 2015 Report Share Posted December 29, 2015 (edited) The Sales Code for Auto headlights disappeared off of Chrysler's list. Hopefully, they will add it back on, just like the DRLs. Hopefully, he can get around this with the gizmo that he ordered. Edited December 29, 2015 by dhh3 Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted December 29, 2015 Author Report Share Posted December 29, 2015 The sales code is LMG and yes you're correct - it disappeared per another online Mopar Tech I was talking to. This AE tool, lists all the control modules, I just have to figure out which one contains the auto headlights. hopefully I'll get into that part of it this evening when I get home. dhh3 1 Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted December 29, 2015 Author Report Share Posted December 29, 2015 (edited) UGH! dhh3 - man I'm so sorry.. I corrected it so no one else makes that mistake. Edited December 29, 2015 by UltraNutZ dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted December 30, 2015 Report Share Posted December 30, 2015 Correct switch ordered. They will allow me to return the other one, even though it is an electrical part. So, good deal for me. I'll install the sensor when the new switch arrives. Then patiently wait for the Sales Code to reappear! Quote Link to comment Share on other sites More sharing options...
xcaliber81 Posted December 30, 2015 Report Share Posted December 30, 2015 Ultra isn't the auto lights store in the bcm? And what does this massing about in the computer do for your warranty? dhh3 1 Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted December 30, 2015 Author Report Share Posted December 30, 2015 xcaliber81 that's a great question and a question I presented to AE prior to purchase. according to AE (and I have it in writing), no digital footprint is left behind so if an issue ever arises you can be assured they'll be the first to hear about it dhh3 1 Quote Link to comment Share on other sites More sharing options...
UltraNutZ Posted January 1, 2016 Author Report Share Posted January 1, 2016 was able to get to this on Wednesday evening. Took some screen shots of the process to post up.. I'll do that maybe tomorrow when I have time. Bottom line is my auto-headlamps are now functioning as they should. dhh3 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.