Greg403 Posted August 19, 2016 Report Share Posted August 19, 2016 I have a 2011 Journey that I need to replace the start/stop button. How do you remove the assembly from the dash. Do you need to remove the display screen to access the switch from behind? Quote Link to comment Share on other sites More sharing options...
dhh3 Posted August 19, 2016 Report Share Posted August 19, 2016 No. It just pulls straight out with a trim removal tool, or small screwdriver. I replaced mine with a red one. After all, I am driving a Crossroad SRT Hellcat! jkeaton 1 Quote Link to comment Share on other sites More sharing options...
Greg403 Posted August 20, 2016 Author Report Share Posted August 20, 2016 Thank you, do I need to pry on the top and bottom or the sides? I tried a little bit but don't want to break the silver trim ring. dhh3 1 Quote Link to comment Share on other sites More sharing options...
dhh3 Posted August 20, 2016 Report Share Posted August 20, 2016 Came out very easy for me. Maybe try one tool on each side. jkeaton and rolly 2 Quote Link to comment Share on other sites More sharing options...
wpginterceptor Posted March 12, 2017 Report Share Posted March 12, 2017 how did you get it out... I was able to get the trim ring out but the button doesn't want to come out.... Quote Link to comment Share on other sites More sharing options...
Greg403 Posted March 12, 2017 Author Report Share Posted March 12, 2017 I removed the radio trim and radio then you can reach in behind and squeeze the holding prongs. Quote Link to comment Share on other sites More sharing options...
Bryman31 Posted September 20, 2017 Report Share Posted September 20, 2017 On 8/19/2016 at 4:07 PM, dhh3 said: No. It just pulls straight out with a trim removal tool, or small screwdriver. I replaced mine with a red one. After all, I am driving a Crossroad SRT Hellcat! WOW i just started a thread about this yesterday. can you direct me to what trim removal tool you used? im totally going to do this!!! also which red button you used? this is the mopar part # i found.... 6GE11XR4AB Steven Harshbarger 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.