nepas Posted December 26, 2016 Report Share Posted December 26, 2016 is there a factory backup camera for a 2016 Journey or does anyone have any info on this. TKS. Quote Link to comment Share on other sites More sharing options...
2late4u Posted December 27, 2016 Report Share Posted December 27, 2016 first place to check dodge dealership to be sure, but i would think yes they would have one no big changes in the journeys.... jkeaton 1 Quote Link to comment Share on other sites More sharing options...
bramfrank Posted December 27, 2016 Report Share Posted December 27, 2016 (edited) If you have the 8.4" display it is a plug, activate and play accessory. Edited December 27, 2016 by bramfrank jkeaton 1 Quote Link to comment Share on other sites More sharing options...
2late4u Posted December 27, 2016 Report Share Posted December 27, 2016 1 hour ago, bramfrank said: If you have the 8.2" display it is a plug, activate and play accessory. 8.4 display ? Quote Link to comment Share on other sites More sharing options...
bramfrank Posted December 27, 2016 Report Share Posted December 27, 2016 (edited) 6 hours ago, 2late4u said: 8.4 display ? Finger error noted . . . . . and corrected. Edited December 27, 2016 by bramfrank Quote Link to comment Share on other sites More sharing options...
nepas Posted December 29, 2016 Author Report Share Posted December 29, 2016 From a dealer : up to 2015 no problem, 2016 problem. I am waiting for an answer from Dodge help desk. Thanks for your replies. Dave Quote Link to comment Share on other sites More sharing options...
bramfrank Posted December 30, 2016 Report Share Posted December 30, 2016 (edited) Dealers are often without clues. I could be wrong, but the radio is unchanged so it must be do-able. There have been no changes as far as I know . . . . What I can say is that the wiring for the camera was supposed to have become standard in the vehicle in 2012, but we couldn't locate the connector in my 2014. Good thing I had the full kit with the harness, so I just put that one in. This assumes you have the 8.4" display, of course. Edited December 30, 2016 by bramfrank jkeaton 1 Quote Link to comment Share on other sites More sharing options...
Steven Harshbarger Posted January 11, 2017 Report Share Posted January 11, 2017 My dealership said there's an oem option and it would cost me a little over $400 for the parts and install. 2late4u 1 Quote Link to comment Share on other sites More sharing options...
2late4u Posted January 11, 2017 Report Share Posted January 11, 2017 not a bad price parts are about $280 last time i checked plus install also it will be covered under your mopar warranty in case any thing goes wrong jkeaton 1 Quote Link to comment Share on other sites More sharing options...
bramfrank Posted January 11, 2017 Report Share Posted January 11, 2017 (edited) $280 gets you the old kit complete with the wiring harness. You should only need the camera bezel (same part for all years) which is about $125, because the vehicles are supposed to be prewired now. And if the harness is there the install OUGHT to take less than an hour - remove the interior panels, unscrew one bolt and remove the old bezel, pop the new one in and put it back together.http://www.ebay.com/itm/OEM-MOPAR-LIFT-GATE-HANDLE-2011-12-DODGE-JOURNEY-FOR-VEHICLES-W-BACKUP-CAMERA-/322058533395 Then they only need to flash the new sales code into the vehicle. Of course this presupposes that you have a vehicle with the 8.4" display. Edited January 11, 2017 by bramfrank jkeaton 1 Quote Link to comment Share on other sites More sharing options...
Steven Harshbarger Posted January 11, 2017 Report Share Posted January 11, 2017 I've been hunting down the OEM camera and have been told by several dealers that the 11-15 camera won't work in the 2016's so I've not pulled the trigger on one yet. I don't want to get to the dealership and have them tell me it won't work when they go to flash the computer. I do have the 8.4' and the wires should be there although I'm not 100% positive. Thanks for the links. I wouldn't mind installing the parts myself if its 100% compatible and saving a few bucks that way. The Dealership told me about 1.5 hours to install and program. In the end, I didn't/don't think thats to bad of a price and it would be covered under the warranty if dodge does it. Quote Link to comment Share on other sites More sharing options...
2late4u Posted January 11, 2017 Report Share Posted January 11, 2017 11 hours ago, bramfrank said: $280 gets you the old kit complete with the wiring harness. You should only need the camera bezel (same part for all years) which is about $125, because the vehicles are supposed to be prewired now. And if the harness is there the install OUGHT to take less than an hour - remove the interior panels, unscrew one bolt and remove the old bezel, pop the new one in and put it back together.http://www.ebay.com/itm/OEM-MOPAR-LIFT-GATE-HANDLE-2011-12-DODGE-JOURNEY-FOR-VEHICLES-W-BACKUP-CAMERA-/322058533395 Then they only need to flash the new sales code into the vehicle. Of course this presupposes that you have a vehicle with the 8.4" display. if you scroll down on the link you supplied it says it is not for a 2016 and it also says there is NO camera supplied with this part Quote Link to comment Share on other sites More sharing options...
2late4u Posted January 11, 2017 Report Share Posted January 11, 2017 1 hour ago, Steven Harshbarger said: I've been hunting down the OEM camera and have been told by several dealers that the 11-15 camera won't work in the 2016's so I've not pulled the trigger on one yet. I don't want to get to the dealership and have them tell me it won't work when they go to flash the computer. I do have the 8.4' and the wires should be there although I'm not 100% positive. Thanks for the links. I wouldn't mind installing the parts myself if its 100% compatible and saving a few bucks that way. The Dealership told me about 1.5 hours to install and program. In the end, I didn't/don't think thats to bad of a price and it would be covered under the warranty if dodge does it. Quote i dont think the wires will be there unless ordered when built. car manufacturer figure every 1/100 of a cent when building a new vehicle as i used to work at Chrysler van plant a few years ago, also my 2014 was not pre-wired, only buy the mopar backup cam that way you are covered on the warranty.. when i bought my 2011 it took almost a yr before the dealers were able to get me the oem cam. good luck and enjoy your journey jkeaton 1 Quote Link to comment Share on other sites More sharing options...
bramfrank Posted January 11, 2017 Report Share Posted January 11, 2017 5 hours ago, 2late4u said: if you scroll down on the link you supplied it says it is not for a 2016 and it also says there is NO camera supplied with this part It's hard for the camera to not be included since it is molded into the bezel. And while it *may* be that the bezel design has changed or perhaps they use a different connector, I personally doubt it. The Mopar accessory site has it included under the 2009-2016 parts, though the kit itself says 2011-215, which can also mean that they simply haven't updated the descriptive text. 7 hours ago, Steven Harshbarger said: I've been hunting down the OEM camera and have been told by several dealers that the 11-15 camera won't work in the 2016's so I've not pulled the trigger on one yet. I don't want to get to the dealership and have them tell me it won't work when they go to flash the computer. I do have the 8.4' and the wires should be there although I'm not 100% positive. Thanks for the links. I wouldn't mind installing the parts myself if its 100% compatible and saving a few bucks that way. The Dealership told me about 1.5 hours to install and program. In the end, I didn't/don't think thats to bad of a price and it would be covered under the warranty if dodge does it. The wires had better be there if the dealer thinks he can install it in an hour and a half. Quote Link to comment Share on other sites More sharing options...
Steven Harshbarger Posted January 11, 2017 Report Share Posted January 11, 2017 I hope the wires are there too! Quote Link to comment Share on other sites More sharing options...
2late4u Posted January 11, 2017 Report Share Posted January 11, 2017 3 hours ago, Steven Harshbarger said: I hope the wires are there too! 3 hours ago, Steven Harshbarger said: I hope the wires are there too! please report back when you get it done or when you find out what needs to be done so other 2016 owners can learn...... Quote Link to comment Share on other sites More sharing options...
Steven Harshbarger Posted January 12, 2017 Report Share Posted January 12, 2017 Yep, will do. I'll post up details when I have it done. Quote Link to comment Share on other sites More sharing options...
Steven Harshbarger Posted January 18, 2017 Report Share Posted January 18, 2017 Parts have been ordered and should be ready for install within the next week or so. When I purchased the vehicle, it was advertised with remote start. Well guess what.. it had no remote start. The dealership is stepping up and having it installed for me. Once that's done, it goes in for the backup camera. The particular dealership doing the install won't give me the part numbers but once I get the paper work back after the install, I'll post them for others who maybe interested. jkeaton 1 Quote Link to comment Share on other sites More sharing options...
mrmighty Posted March 14, 2017 Report Share Posted March 14, 2017 Hello Steve.How did you make out with camera install? thanks for your time, Joe Quote Link to comment Share on other sites More sharing options...
Steven Harshbarger Posted March 15, 2017 Report Share Posted March 15, 2017 14 hours ago, mrmighty said: Hello Steve.How did you make out with camera install? thanks for your time, Joe Joe - I made out good. Very straight forward. The dealership did the install, added the sales code to the uconnect and it works flawless. I'm very glad I added it. I was kinda missing it. Quote Link to comment Share on other sites More sharing options...
mrmighty Posted March 28, 2017 Report Share Posted March 28, 2017 if you dont mind me asking, what did they charge you? Thanks again for your time Quote Link to comment Share on other sites More sharing options...
2late4u Posted March 28, 2017 Report Share Posted March 28, 2017 also did they use the supposed wires already there or did they use the full kit. part #? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.