stazz75 Posted June 12, 2018 Report Share Posted June 12, 2018 Just purchased a 2016 Journey and dealer says they want an extra $500 at my cost to have the navigation fixed. I thought it would be covered by warranty but they claim it's not.. this thread helps, however I have no idea where to find the maps. Can someone please help? I Was excited about the navigation then after I purchased the vehicle they tell me about the extra $500 fee and I was aggravated about it. I figured it should work from the get go but I guess not.. Quote Link to comment Share on other sites More sharing options...
bramfrank Posted June 12, 2018 Report Share Posted June 12, 2018 (edited) 4 hours ago, stazz75 said: Just purchased a 2016 Journey and dealer says they want an extra $500 at my cost to have the navigation fixed. I thought it would be covered by warranty but they claim it's not.. this thread helps, however I have no idea where to find the maps. Can someone please help? I Was excited about the navigation then after I purchased the vehicle they tell me about the extra $500 fee and I was aggravated about it. I figured it should work from the get go but I guess not.. Base warranty is 3/36 - if the vehicle has more than 3 years or 36K miles on it then the manufacturer's warranty on the navigator will have expired. However even if it has, everything ought to have been working when they delivered it to you. If not, it CAN be made to work without dealer intervention, as you know if you read through this topic. Edited June 12, 2018 by bramfrank Quote Link to comment Share on other sites More sharing options...
jkeaton Posted June 12, 2018 Report Share Posted June 12, 2018 9 hours ago, stazz75 said: Just purchased a 2016 Journey and dealer says they want an extra $500 at my cost to have the navigation fixed. I thought it would be covered by warranty but they claim it's not.. this thread helps, however I have no idea where to find the maps. Can someone please help? I Was excited about the navigation then after I purchased the vehicle they tell me about the extra $500 fee and I was aggravated about it. I figured it should work from the get go but I guess not.. Navigation is more trouble than it's worth....lol. Quote Link to comment Share on other sites More sharing options...
bramfrank Posted June 12, 2018 Report Share Posted June 12, 2018 1 hour ago, jkeaton said: Navigation is more trouble than it's worth....lol. I've never had any problems with the one in my Journey - and I'd wager that statement applies to the overwhelming majority of owners out there. Quote Link to comment Share on other sites More sharing options...
FendleTruck Posted June 12, 2018 Report Share Posted June 12, 2018 I've replaced my radio 4 times so far for this issue. I'm guessing a lot of people simply don't use navigation, either that or when you get your radio swapped, you get it swapped with some "refurbished" unit, that simply breaks again after a few months. "Refurbished" in quotes because what I am guessing is happening, is that they just keep putting the corrupted file back on the radio, and saying it's new, even though the memory module is somehow defective. It's like if your hard drive gets corrupted, and instead of replacing it, you just install everything back on it and hope it's fine now. Quote Link to comment Share on other sites More sharing options...
JAR414 Posted June 12, 2018 Report Share Posted June 12, 2018 I followed the instructions here, and the Nav unit on my 2014 DJ-SXT is working like a charm. Quote Link to comment Share on other sites More sharing options...
Barek Al-Mallak Posted June 28, 2018 Report Share Posted June 28, 2018 Gentlemen, Greetings, I am new on uconnect 8.4 nav system, I have a dodge journey 2012 and just replayced my 4.3 screen to uconnect 8.4 with nav system, my post might be out of subject, but just wanna try of someone can guide me, current map installed is for north amarica and mexico, I am trying to find a way to install middle east map? Is there any way to do so? Any feedback will be much appreciated.. Quote Link to comment Share on other sites More sharing options...
bramfrank Posted June 28, 2018 Report Share Posted June 28, 2018 I worked with someone from Sweden a while back who also wanted to re-home his system from the US to Europe. He was able to install 3rd party maps, though address support and such was unavailable - if I recall correctly the 3rd party maps were installed as a gmapsupp.img file. I wish you luck - you are likely to be feeling your own way around. It might be simpler just to move to the US. Quote Link to comment Share on other sites More sharing options...
JAR414 Posted June 29, 2018 Report Share Posted June 29, 2018 One option would be to see if Garmin publishes maps like the ones they do for North America. The next option would be to get Open Source Maps for the Mideast and see if you can convert them to the gmapsupp.img. You might still have issues with address support. Best of luck! Quote Link to comment Share on other sites More sharing options...
Barek Al-Mallak Posted June 29, 2018 Report Share Posted June 29, 2018 5 hours ago, JAR414 said: One option would be to see if Garmin publishes maps like the ones they do for North America. The next option would be to get Open Source Maps for the Mideast and see if you can convert them to the gmapsupp.img. You might still have issues with address support. Best of luck! many thanks for your feedback, actually I have the gmapsupp.img file for area I am looking for, but to be honest, as I said before, I am new to uconnect 8.4, so any advise on how to install that gmapsupp.img on device will be much appreciated... Quote Link to comment Share on other sites More sharing options...
JAR414 Posted August 6, 2018 Report Share Posted August 6, 2018 Go back to the first page Quote Link to comment Share on other sites More sharing options...
sasktorgy Posted August 28, 2018 Report Share Posted August 28, 2018 Just wondering if anyone on here downgraded from CTP17 - CTP13 and lost their navigation settings. I backed up the users settings before, but when i restore them, i get an error. I used to get Cannot unlock maps. When i hit the navigation button it just sits at the loading garmin screen. Nothing else is affected, as NAV wasn't working before. I also upgraded back to CTP17 to try and restore but still same issue..... Any suggestions would be appreciated! Thanks Quote Link to comment Share on other sites More sharing options...
JAR414 Posted September 4, 2018 Report Share Posted September 4, 2018 I believe Garmin is now up to North America City Navigator 2019.20...anyone make the jump to it yet? Quote Link to comment Share on other sites More sharing options...
Miguel Pereira Posted September 4, 2018 Report Share Posted September 4, 2018 13 hours ago, JAR414 said: I believe Garmin is now up to North America City Navigator 2019.20...anyone make the jump to it yet? Honestly I'm ready to upgrade but haven't bothered yet. Quote Link to comment Share on other sites More sharing options...
rkilbrai Posted September 19, 2018 Report Share Posted September 19, 2018 Had this issue on my 2014 Dodge Journey. The screen turned black, and then the next time it turned on, no detailed maps... I asked the dealer about it and the guy had heard about it and said the only fix was to replace the stereo. That didn't sound right. It took a lot of searching to find all files, but finally found them all (and upgraded to the 2018 maps). I couldn't do the one step update (got half way then failed, but the multiple step worked). I left the 5 files in the main folder and the SQLite folder (unsure if that helps, or if I have anything extra, but it all worked). Here were my steps (PM me if you need an help with files): DOWNGRADE TO CTP13 Downgrade radio navigation to CTP13! This is very important as newer versions have securIty that prevents loading of maps without dealer codes. Take a second USB drive with the gupdate.gcd from CTP13. Turn on the car and hold temp up + temp down + front defrost, after a few seconds dealer mode will pop up. Select garmin recovery update and plug in the usb drive with CTP13 on it. NOTE: After you flash this it takes a long time to load. Let it load and it will still say cannot unlock maps. Just click ok, you may need to restart your car one time to click out of the pop up. — RESTORE MAPS (LONGER VERSION, SHORT VERSION DIDN’T WORK) Step 1: 1) On the USB stick, create another folder in the root named "Disabled". 2) Move the Garmin subfolders (ASR, JCV, & SID) into the "Disabled" folder. Keep the five files (gmapprom.img, gmap3d.img, gmaptz.img, gmapbmap.img and gmapdem.img) and the SQLite folder in the Garmin folder. 3) Plug the USB stick into the car and perform the update. It will take about one hour. You don’t have to keep the vehicle running but rather in the ON position. The vehicle will turn off after 30 minutes, so do a cycle before that time (don’t start the vehicle as it will turn the system on and off again). Step 2: 1) On the USB stick, move gmap3d.img, gmaptz.img, gmapbmap.img and gmapdem.img from the Garmin folder into the Disabled folder. Leave only gmapprom.img in the Garmin folder. 2) Move the JCV folder from the Disabled folder into the Garmin folder (SQLite Folder stays). 3) Plug the USB stick into the car and perform the update again. When this is done, the Junction View is now installed, and the 3D landmarks and time zones are still there. Step 3: 1) On the USB stick, move the ASR and SID folders from the Disabled folder into the Garmin folder. Leave gmapprom.img and the JCV and SQLite folders. 2) Plug the USB stick into the car and perform the update once again. After this is completed, the system is fully updated to the new maps and all features work except for the phone number lookup. ___ UPGRADE RADIO Using the latest files from https://www.driveuconnect.com/support/software-update.html upgrade the radio and GPS software. In September 2018, these files were: CTPMY14.KWI (Radio to 7.09) and gupdate.gcd (CTP17). The first is the only file in the root directory of the flash drive. The second is the only file in the Garmin folder (no other folders or files on the drive). Do one and then the other. Miguel Pereira, larryl and cody168 1 2 Quote Link to comment Share on other sites More sharing options...
kcalcutt Posted October 9, 2018 Report Share Posted October 9, 2018 On 9/3/2018 at 8:50 PM, JAR414 said: I believe Garmin is now up to North America City Navigator 2019.20...anyone make the jump to it yet? i have loaded 2019.20 and all is good. Just thinking about if i really need to go back to CTP 17 does anyone know if staying on CTP13 is a bad idea? Quote Link to comment Share on other sites More sharing options...
rkilbrai Posted October 9, 2018 Report Share Posted October 9, 2018 I found the CTP 17 adds a few extra features that weren't even available on CTP 16. I've wanted to upgrade to 2019.20 but for the life of me cannot find the files! We're you able to upgrade in one step or did you have to do multiple steps? Quote Link to comment Share on other sites More sharing options...
bramfrank Posted October 10, 2018 Report Share Posted October 10, 2018 11 hours ago, rkilbrai said: I found the CTP 17 adds a few extra features that weren't even available on CTP 16. I've wanted to upgrade to 2019.20 but for the life of me cannot find the files! We're you able to upgrade in one step or did you have to do multiple steps? If I may . . . what features did CTP17 add for you? Quote Link to comment Share on other sites More sharing options...
Barek Al-Mallak Posted October 10, 2018 Report Share Posted October 10, 2018 Any chance to get the ctp11 firmware anywhere? Any one have it already on his uconnect device and can do backup? Unfortunately I even cannot go to dealer as there is no one available in my area.... Quote Link to comment Share on other sites More sharing options...
rkilbrai Posted October 10, 2018 Report Share Posted October 10, 2018 9 hours ago, bramfrank said: If I may . . . what features did CTP17 add for you? It may be that I just never noticed before (got the vehicle in July), but now the GPS is predictive of where I'm going. If it know that I go someone on Sunday, as I start to drive it shows the name of that place and how long it will take to arrive (it's just a bar on top). If I like, I can just tap on that bar and it will route me there. It's not been 100% accurate, but usually pretty good. I think it requires that I've used GPS to go to that location in the past. Quote Link to comment Share on other sites More sharing options...
rkilbrai Posted October 10, 2018 Report Share Posted October 10, 2018 8 hours ago, Barek Al-Mallak said: Any chance to get the ctp11 firmware anywhere? Any one have it already on his uconnect device and can do backup? Unfortunately I even cannot go to dealer as there is no one available in my area.... I can't do 11, but you only need to downgrade to 13 to be able to upload new maps without going to the dealer. PM me if you like. Quote Link to comment Share on other sites More sharing options...
twedlake Posted October 10, 2018 Report Share Posted October 10, 2018 someone local to the Houston area willing to do this for me? Happy to pay, cash or beer. :-) wife's 2016 crossroads plus - she was in austin a couple of weekends ago, went to enter an address on the nav system that has been working flawlessly from day1, started entering address, then the screen blacks out, and when it comes back on she now has the infamous "can't unlock maps" and no detailed local info available messages. Course the sob would be less than 2 weeks out of warranty when this happens. Quote Link to comment Share on other sites More sharing options...
IvonneFue Posted October 10, 2018 Report Share Posted October 10, 2018 Can anyone email me and possibly walk me through the steps? Im not familiar with torrents but I want to try to get the maps unlocked on my Journey ! Someone please guide me in the right direction! Quote Link to comment Share on other sites More sharing options...
JAR414 Posted October 21, 2018 Report Share Posted October 21, 2018 Silly question...how important is it to have the SQLite\D*****.db file in the USB drive? Quote Link to comment Share on other sites More sharing options...
bramfrank Posted October 21, 2018 Report Share Posted October 21, 2018 (edited) That directory shouldn't even be there. Look at the first post in this tread which will tell you what directories you need. The specifics of the file names depends on the map version you are installing. Edited October 21, 2018 by bramfrank cody168 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.